350/360/330 SBC with Edelbrock heads

Dragsinger · 09-26-2020, 03:59 PM

Is an aftermarket intake legal?

rdlong1961 · 09-26-2020, 04:20 PM

Casting No's10185024 ,3972110, and 3972116 Aluminum

Dragsinger · 09-26-2020, 11:15 PM

A quick scan shows finding the correct intake will be a challenge. Anybody have one?

rdlong1961 · 09-27-2020, 06:43 AM

pm sent

Dragsinger · 09-27-2020, 08:50 AM

Rodney, Thanks, I will follow up.

Andrew Hill · 09-27-2020, 08:58 PM

Larry, we have used all 3 intakes for this combo. The 110 is expensive and hard to find (for a SBC part), and they all 3 perform the same from what I’ve seen. I have an 024 on one motor and a 110 on the other right now. There was a 116 or 024 on eBay a while back, if I remember right it may have been Steve Ficcaci that had it listed.

SDT1DYI · 10-03-2020, 08:54 AM

There has been some discussions with Dart as to making a pattern for 165 CC intake runners. Use the same part# for NHRA approval process. Then you could get to 161 CC applications as well.
There are guys running aftermart heads with no modifications to runner volumes...
Bigger intake runners don't always mean the you will be a faster.

Steve Teeter Stk/SS 620

09-26-2020, 03:59 PM	#1
Dragsinger VIP Member Join Date: Jul 2008 Location: Liberty City [East Texas] Posts: 1,759 Likes: 5 Liked 99 Times in 60 Posts	350/360/330 SBC with Edelbrock heads Is an aftermarket intake legal? __________________ Larry Woodfin 471W

09-26-2020, 04:20 PM	#2
rdlong1961 Junior Member Join Date: Nov 2014 Location: Celina, Ohio Posts: 25 Likes: 44 Liked 0 Times in 0 Posts	Re: 350/360/330 SBC with Edelbrock heads Casting No's10185024 ,3972110, and 3972116 Aluminum __________________ Rodney Long - #3488 Stock

09-26-2020, 11:15 PM	#3
Dragsinger VIP Member Join Date: Jul 2008 Location: Liberty City [East Texas] Posts: 1,759 Likes: 5 Liked 99 Times in 60 Posts	Re: 350/360/330 SBC with Edelbrock heads A quick scan shows finding the correct intake will be a challenge. Anybody have one? __________________ Larry Woodfin 471W

09-27-2020, 06:43 AM	#4
rdlong1961 Junior Member Join Date: Nov 2014 Location: Celina, Ohio Posts: 25 Likes: 44 Liked 0 Times in 0 Posts	Re: 350/360/330 SBC with Edelbrock heads pm sent __________________ Rodney Long - #3488 Stock

09-27-2020, 08:50 AM	#5
Dragsinger VIP Member Join Date: Jul 2008 Location: Liberty City [East Texas] Posts: 1,759 Likes: 5 Liked 99 Times in 60 Posts	Re: 350/360/330 SBC with Edelbrock heads Rodney, Thanks, I will follow up. __________________ Larry Woodfin 471W

09-27-2020, 08:58 PM	#6
Andrew Hill Senior Member Join Date: Mar 2008 Location: Chicago, IL Posts: 701 Likes: 426 Liked 170 Times in 38 Posts	Re: 350/360/330 SBC with Edelbrock heads Larry, we have used all 3 intakes for this combo. The 110 is expensive and hard to find (for a SBC part), and they all 3 perform the same from what I’ve seen. I have an 024 on one motor and a 110 on the other right now. There was a 116 or 024 on eBay a while back, if I remember right it may have been Steve Ficcaci that had it listed. __________________ 3207 D/SA, C/ED

10-03-2020, 08:54 AM	#7
SDT1DYI Member Join Date: Nov 2016 Location: Indianola Washington Posts: 353 Likes: 0 Liked 394 Times in 124 Posts	Re: 350/360/330 SBC with Edelbrock heads There has been some discussions with Dart as to making a pattern for 165 CC intake runners. Use the same part# for NHRA approval process. Then you could get to 161 CC applications as well. There are guys running aftermart heads with no modifications to runner volumes... Bigger intake runners don't always mean the you will be a faster. Steve Teeter Stk/SS 620