EZ Plate Systems

rickracer · 12-18-2013, 08:35 AM

Any Super Class racers use an EZ Plate System? Curious - would like to hear some input if you use it.

sst7250 · 12-18-2013, 01:11 PM

Cannot imagine you are going to find many since it is a MPH game and the EZ plate system does just the opposite by killing MPH. Good system though I have a lot of freinds that use them in the Gas classes with great success.

Queball Lattie · 12-18-2013, 02:38 PM

I have used the E-Z Plate System for 2 years and love it.

voltdr · 12-18-2013, 08:47 PM

Quote:

Originally Posted by Queball Lattie

I have used the E-Z Plate System for 2 years and love it.

Which class and type of car?
Dan

Queball Lattie · 12-18-2013, 10:01 PM

11.00 index, Super Street, and Hot Rod small block Vega.

rickracer · 12-19-2013, 07:59 AM

What about the Willys Carb restrictor plate? That is adjustable without adding or removing plates.

HR9121 · 12-19-2013, 11:14 PM

I used a Willy's a few times when I was running some index races and it worked really well for me. Only problem I ever had was the threaded part started loosening and the vibration would cause it to open, someone told me about putting a little locktite on the threads and never had another issue. I did use it at a couple division races in hot rod and it was very dialable, my car was a slower car so the loss of mph was not an issue to me because I was used to looking over my shoulder 98% of the time anyway.

sst7250 · 12-20-2013, 02:17 PM

I think if you are simply trying to shave a little in ET then these systems are likely the best way to go.

HR9121 · 12-20-2013, 04:42 PM

Quote:

Originally Posted by sst7250

I think if you are simply trying to shave a little in ET then these systems are likely the best way to go.

Agree with this 100%, my car was a low hp car and would only be on the throttle stop around a half second and sometimes could be very unpredictable at times. I would say for racers only needing to slow down 3 or 4 tenths this would be the way to go otherwise go for the mph.

1320racer · 01-02-2014, 04:02 PM

Quote:

Originally Posted by rickracer

What about the Willys Carb restrictor plate? That is adjustable without adding or removing plates.

Been using Willy's adjustable restrictor plate for the past 6 seasons. That said, there is no simplier, easier or quicker way to adjust your ET up to 5+ tenths in less than 30 seconds.

12-18-2013, 08:35 AM	#1
rickracer Junior Member Join Date: Jul 2007 Location: Conowingo, Md Posts: 42 Likes: 0 Liked 0 Times in 0 Posts	EZ Plate Systems Any Super Class racers use an EZ Plate System? Curious - would like to hear some input if you use it. Attached Thumbnails

12-18-2013, 01:11 PM	#2
sst7250 Member Join Date: Jan 2009 Location: Las Vegas, NV Posts: 179 Likes: 9 Liked 40 Times in 29 Posts	Re: EZ Plate Systems Cannot imagine you are going to find many since it is a MPH game and the EZ plate system does just the opposite by killing MPH. Good system though I have a lot of freinds that use them in the Gas classes with great success.

12-18-2013, 02:38 PM	#3
Queball Lattie Junior Member Join Date: Mar 2009 Posts: 14 Likes: 0 Liked 0 Times in 0 Posts	Re: EZ Plate Systems I have used the E-Z Plate System for 2 years and love it.

12-18-2013, 10:01 PM	#5
Queball Lattie Junior Member Join Date: Mar 2009 Posts: 14 Likes: 0 Liked 0 Times in 0 Posts	Re: EZ Plate Systems 11.00 index, Super Street, and Hot Rod small block Vega.

12-19-2013, 07:59 AM	#6
rickracer Junior Member Join Date: Jul 2007 Location: Conowingo, Md Posts: 42 Likes: 0 Liked 0 Times in 0 Posts	Re: EZ Plate Systems What about the Willys Carb restrictor plate? That is adjustable without adding or removing plates.

12-19-2013, 11:14 PM	#7
HR9121 Live Reporter Join Date: Jan 2011 Location: New Bern, NC Posts: 3,353 Likes: 112 Liked 2,869 Times in 641 Posts	Re: EZ Plate Systems I used a Willy's a few times when I was running some index races and it worked really well for me. Only problem I ever had was the threaded part started loosening and the vibration would cause it to open, someone told me about putting a little locktite on the threads and never had another issue. I did use it at a couple division races in hot rod and it was very dialable, my car was a slower car so the loss of mph was not an issue to me because I was used to looking over my shoulder 98% of the time anyway. __________________ James Williamson W200 J/SA

12-20-2013, 02:17 PM	#8
sst7250 Member Join Date: Jan 2009 Location: Las Vegas, NV Posts: 179 Likes: 9 Liked 40 Times in 29 Posts	Re: EZ Plate Systems I think if you are simply trying to shave a little in ET then these systems are likely the best way to go.