|
06-21-2015, 02:16 PM | #1 |
Junior Member
Join Date: Oct 2013
Location: Winfield, Kansas
Posts: 37
Likes: 14
Liked 17 Times in 4 Posts
|
Stock Roller Lifters
Are we allowed to use the hydraulic roller lifters that use the link bar for alignment instead of using the original type with the spider and dogbones? 305 Chevy stocker.
|
06-21-2015, 04:01 PM | #2 |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,414
Likes: 2,581
Liked 4,447 Times in 1,693 Posts
|
Re: Stock Roller Lifters
No...but you can use them in Super Stock if you'd rather be there LOL
__________________
We are lucky we don't get as much Government as we pay for..... Will Rogers |
06-22-2015, 01:36 PM | #3 |
Member
Join Date: Oct 2003
Location: Lower Slower Delaware
Posts: 493
Likes: 14
Liked 199 Times in 74 Posts
|
Re: Stock Roller Lifters
You cannot use a solid roller lifter.
If the engine was hydraulic roller from the factory it is legal to use aftermarket hydraulic roller lifters with tie bar. Always check with your division tech director.
__________________
Frank Ferrucci ?/SA 1271 |
06-22-2015, 05:12 PM | #4 | |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,414
Likes: 2,581
Liked 4,447 Times in 1,693 Posts
|
Re: Stock Roller Lifters
Quote:
I just can't keep up with this new Stock. This is for safety, no doubt.
__________________
We are lucky we don't get as much Government as we pay for..... Will Rogers |
|
06-23-2015, 09:13 AM | #5 |
Member
Join Date: Oct 2003
Location: Lower Slower Delaware
Posts: 493
Likes: 14
Liked 199 Times in 74 Posts
|
Re: Stock Roller Lifters
Mark, no performance advantage the lifter is heavier.taller.
__________________
Frank Ferrucci ?/SA 1271 |
06-23-2015, 12:47 PM | #6 |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,414
Likes: 2,581
Liked 4,447 Times in 1,693 Posts
|
Re: Stock Roller Lifters
Then I would assume you could use an early block to build a roller motor for Stock?
__________________
We are lucky we don't get as much Government as we pay for..... Will Rogers |
06-23-2015, 01:17 PM | #7 |
Member
Join Date: Oct 2003
Location: Lower Slower Delaware
Posts: 493
Likes: 14
Liked 199 Times in 74 Posts
|
Re: Stock Roller Lifters
Yes
__________________
Frank Ferrucci ?/SA 1271 |
06-23-2015, 11:58 PM | #8 |
Junior Member
Join Date: Apr 2012
Location: Somwhere in NJ
Posts: 72
Likes: 4
Liked 3 Times in 3 Posts
|
Re: Stock Roller Lifters
Taller is a good thing ,allows for a shorter pushrod,extra weight on the lifter side of the rocker not a problem.Bill C.
|
06-24-2015, 09:26 AM | #9 |
Member
Join Date: Oct 2003
Location: Lower Slower Delaware
Posts: 493
Likes: 14
Liked 199 Times in 74 Posts
|
Re: Stock Roller Lifters
Agreed Bill! Was waiting for Mark to mention that.
Shorter can be stiffer for less deflection in the valve train.
__________________
Frank Ferrucci ?/SA 1271 |
06-28-2015, 12:33 AM | #10 |
Member
Join Date: Dec 2001
Posts: 147
Likes: 0
Liked 5 Times in 3 Posts
|
Re: Stock Roller Lifters
As soon as they started allowing bow tie blocks mark they started allowing the use of the hydraulic tie bar lifters. I do agree the new version of stock is definitely way different than the rules we had when I started in the mid 90's, I can only imagine how much different it is for guys that started in the 70's and 80's or earlier...such is life I guess...lol
|
|
|