Canted valve SBC heads

Pat Cook · 10-06-2011, 12:14 AM

Can anybody tell me who make these heads?

396chevy · 10-06-2011, 08:18 AM

Quote:

Originally Posted by Pat Cook

Can anybody tell me who make these heads?

Trick-flow (sold thru summit) had heads that resembled these several years ago called "twisted wedge"

Eddies66 · 10-06-2011, 09:00 AM

Over on the Chevelle formun there is a little more info on them and there is a stud girdle by JOMAR Performance. Only limiting factor is that you will need to run flat top pistons or special order a domed. They do have 2.02 intakes whicj I think for Rick's build is all he needs.

http://www.chevelles.com/forums/showthread.php?t=17310

Pat Cook · 10-06-2011, 11:41 AM

After the heads were removed the 400 shrank to a .030 over 350. Oops....

Thanks for the feedback.

Eddies66 · 10-06-2011, 12:55 PM

Quote:

Originally Posted by Pat Cook

After the heads were removed the 400 shrank to a .030 over 350. Oops....

Thanks for the feedback.

Put a 400 crank in it and make it a 383! You must have left it in the rain for it to shrink that small!

L78 Nova · 10-06-2011, 01:41 PM

Had a 350 that shrink to a 307 like that one time....

10-06-2011, 12:14 AM	#1
Pat Cook Member Join Date: Jun 2002 Posts: 175 Likes: 0 Liked 0 Times in 0 Posts	Canted valve SBC heads Can anybody tell me who make these heads? Attached Thumbnails __________________ 67 Ford Fairlane F/SA 749

10-06-2011, 09:00 AM	#3
Eddies66 VIP Member Join Date: Feb 2010 Location: Rancho Mirage, CA Posts: 1,120 Likes: 282 Liked 794 Times in 383 Posts	Re: Canted valve SBC heads Over on the Chevelle formun there is a little more info on them and there is a stud girdle by JOMAR Performance. Only limiting factor is that you will need to run flat top pistons or special order a domed. They do have 2.02 intakes whicj I think for Rick's build is all he needs. http://www.chevelles.com/forums/showthread.php?t=17310

10-06-2011, 11:41 AM	#4
Pat Cook Member Join Date: Jun 2002 Posts: 175 Likes: 0 Liked 0 Times in 0 Posts	Re: Canted valve SBC heads After the heads were removed the 400 shrank to a .030 over 350. Oops.... Thanks for the feedback. __________________ 67 Ford Fairlane F/SA 749

10-06-2011, 01:41 PM	#6
L78 Nova Junior Member Join Date: Dec 2009 Location: Winnipeg, MB Posts: 87 Likes: 194 Liked 14 Times in 10 Posts	Re: Canted valve SBC heads Had a 350 that shrink to a 307 like that one time....