|
04-20-2018, 06:23 PM | #1 |
VIP Member
Join Date: Oct 2007
Posts: 1,112
Likes: 416
Liked 273 Times in 105 Posts
|
Mounting Turbo Action Shifter
I just purchased on of these to go into my cuda and am looking for some mounting options. There is no center console in the car and would like to see what other people have done
Thanks Dave |
04-20-2018, 11:55 PM | #2 |
Junior Member
Join Date: Jan 2018
Location: Colorado
Posts: 79
Likes: 205
Liked 94 Times in 24 Posts
|
Re: Mounting Turbo Action Shifter
I bolted it directly to the tunnel with 1/4 inch bolts on our A body cars. My sons was little better fitting because of old floor shifter and the tunnel was flatter.
Larry |
04-21-2018, 12:17 AM | #3 |
Member
Join Date: Apr 2013
Location: Fabulous Las Vegas
Posts: 113
Likes: 28
Liked 21 Times in 12 Posts
|
Re: Mounting Turbo Action Shifter
^^^^^^^ Ditto ^^^^^^^^
__________________
Jeff Dudgeon '66 Coronet #10771 - bracket puke "the Flying Brick" |
04-21-2018, 01:03 AM | #4 |
VIP Member
Join Date: Oct 2007
Posts: 1,112
Likes: 416
Liked 273 Times in 105 Posts
|
Re: Mounting Turbo Action Shifter
Thanks. do you directly bolt it the floor boards and mount a little higher higher?This is for a 67 notch
|
04-21-2018, 08:03 AM | #5 |
Live Reporter
Join Date: Oct 2004
Location: Hickory, Ky
Posts: 10,299
Likes: 1,648
Liked 9,522 Times in 1,975 Posts
|
Re: Mounting Turbo Action Shifter
Bolt it to the floor after you find out what is a comfortable location for you.
|
04-21-2018, 10:14 AM | #6 |
Member
Join Date: Oct 2009
Location: columbus, georgia
Posts: 360
Likes: 41
Liked 225 Times in 71 Posts
|
Re: Mounting Turbo Action Shifter
I usually space the front of the shifter up some as the neutral safety switch is tight against the floor in some applications.
|
04-21-2018, 01:45 PM | #7 |
Junior Member
Join Date: Jan 2018
Location: Colorado
Posts: 79
Likes: 205
Liked 94 Times in 24 Posts
|
Re: Mounting Turbo Action Shifter
On my son's 73 Dart we used washers under the back because of the angle of the cable going through the floor. Like others have said, what fits best for your comfort.
|
04-23-2018, 06:13 PM | #8 |
Junior Member
Join Date: Sep 2012
Posts: 98
Likes: 20
Liked 32 Times in 13 Posts
|
Re: Mounting Turbo Action Shifter
Mine is mounted on a pedestal on the tunnel bringing the shifter up an closer to me.
|
04-23-2018, 06:29 PM | #9 |
VIP Member
Join Date: Oct 2007
Posts: 1,112
Likes: 416
Liked 273 Times in 105 Posts
|
Re: Mounting Turbo Action Shifter
|
04-24-2018, 03:52 PM | #10 |
Member
Join Date: May 2010
Location: El Dorado Ca.
Posts: 116
Likes: 244
Liked 34 Times in 20 Posts
|
Re: Mounting Turbo Action Shifter
I use a piece of angle iron, so its sits up higher, and i weld the angle to the floor, with some flat bar on the other side for support, then bolt the shifter to angle.
__________________
Steven Barnes Stock 704 N/SA |
|
|