|
09-07-2014, 11:49 AM | #1 |
Junior Member
Join Date: Oct 2013
Location: Winfield, Kansas
Posts: 37
Likes: 14
Liked 17 Times in 4 Posts
|
GM 8.5 mini spool
Anybody run a mini spool in a 8.5 GM rear end? Will they survive in a low horsepower stocker?
|
09-28-2014, 08:30 PM | #2 |
Member
Join Date: Jan 2002
Location: Sedalia, Mo
Posts: 427
Likes: 280
Liked 290 Times in 58 Posts
|
Re: GM 8.5 mini spool
They are recommended for dirt track cars only. I don't know why.
__________________
Bob Shaw V/SA 515 |
09-28-2014, 10:42 PM | #3 |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,414
Likes: 2,579
Liked 4,447 Times in 1,693 Posts
|
Re: GM 8.5 mini spool
J,
A posi-traction will survive in a low hp automatic Stocker. I don't see why a mini spool wouldn't.
__________________
We are lucky we don't get as much Government as we pay for..... Will Rogers |
10-04-2014, 09:50 AM | #4 |
Senior Member
Join Date: Apr 2009
Location: Omaha, NE
Posts: 673
Likes: 140
Liked 72 Times in 40 Posts
|
Re: GM 8.5 mini spool
I believe a mini spool is not legal in NHRA. You are also required to have aftermarket axles when running a spool.
|
10-10-2014, 02:07 PM | #5 |
Member
Join Date: Jan 1970
Location: Jackson, Ms.
Posts: 350
Likes: 183
Liked 10 Times in 4 Posts
|
Re: GM 8.5 mini spool
When I bought my H or J/SA 1980 Camaro it had a mini spool in it and had hundreds of passes on it without failure.
__________________
#4892 J/SA. We are what we repeatedly do. Excellence then, is not an act, but a habit.” - Aristotle |
10-10-2014, 02:37 PM | #6 |
Junior Member
Join Date: Mar 2013
Posts: 78
Likes: 11
Liked 18 Times in 5 Posts
|
Re: GM 8.5 mini spool
It may last, but it is more prone to failure because with a mini-spool, all the load from the ring gear to the axles is transmitted only through the pin, to the bore in the cast case. With a posi unit, most of this load is transmitted through the clutches, into the inside of the case.
|
10-10-2014, 04:02 PM | #7 |
Junior Member
Join Date: Sep 2009
Posts: 5
Likes: 0
Liked 0 Times in 0 Posts
|
Re: GM 8.5 mini spool
I ran a 8.5 ten bolt mini spool in a 87 firebird 3200 lbs bracket car. the car ran 11.17 122mph 1/4 mile 7.08 99mph 1/8 mile with a trans brake. We had over 100 passes at those time with no problems. I would not say that they are bullet proof but if you foot brake with low hp it should last a long time.
|
Thread Tools | |
Display Modes | |
|
|