|
08-19-2023, 10:37 PM | #1 |
Junior Member
Join Date: Jul 2023
Posts: 14
Likes: 0
Liked 9 Times in 3 Posts
|
SBC Alternator mount
Need input on an alternator & mount for lower left side, for 69 Camaro SBC.
Stock one won't fit. |
08-20-2023, 12:02 AM | #2 |
Senior Member
Join Date: Jun 2011
Location: Langley (no igloos), British Columbia, Canada
Posts: 551
Likes: 269
Liked 228 Times in 78 Posts
|
Re: SBC Alternator mount
Danny… I've used PowerMaster 885 Bracket with a small Nippon-Denso alternator converted to a 1 Wire on my 56 BelAir. No issues over 25000 miles, with only 1 adjustment. Alternator is about the size of an average coffee mug. Hope this helps…Maurice.
|
Liked |
08-20-2023, 01:11 PM | #3 |
Member
Join Date: May 2014
Location: E TN
Posts: 442
Likes: 14
Liked 106 Times in 61 Posts
|
Re: SBC Alternator mount
I've had a Powermaster 1 wire alternator and bracket on my 3rd gen Camaro for over 20 years. Mounts to the 2 lower holes on the front of the block, I used studs just to make it easier. I used it when I had stock motor mounts and still use it with a motor plate just had to space the pulley out from the balancer.
|
08-20-2023, 08:38 PM | #4 |
Junior Member
Join Date: Jul 2023
Posts: 14
Likes: 0
Liked 9 Times in 3 Posts
|
Re: SBC Alternator mount
Thanks Guys for the info
|
08-20-2023, 08:42 PM | #5 |
Junior Member
Join Date: Jul 2023
Posts: 14
Likes: 0
Liked 9 Times in 3 Posts
|
Re: SBC Alternator mount
Thanks for the info
|
Liked |
|
|