Split Y spark plug wires

[Chris "drooze" Wertman]

Has anyone had and experience and KNOW a good source for Custom Split Y spark plug wires for about a 60kv per plug (120kv source) ?

I used to have a source for Motorcycles but they are gone now about 5 years.

The car has COP and Im using the LS2 Truck coil it has Dual Plug heads and its a Hemi so its to my advantage to run both plugs.

Since the rules state Stock number of coils , I cant do what I wanted and run 16 coils. So......I need to split it.

A good vendor for a custom make on these, a lot of the "big" guys, Oh we wont do that, or cant ? I mean come on.....

Cheers

Chris

[340Cuda]

http://www.firecore50.com/

First place I would look, you may know them from Moparts.

Bill

[Chris "drooze" Wertman]

Thanks, didnt see your response Ill give em a call....the issue is with the higher voltage (120k split 60k a side) and the insulation, noone make a connector for the modern wires , or a boot for 3.......

Uhgggggg.....Im litterally drilling a mold today to make the split Y boots and run a 3 connector Y Im brazing out of brass allthread....but Im gonna hold and see if theyve got anyting I really dont want to do this times 20.....2 sets and a few spares....

Thanks.

Originally Posted by 340Cuda

http://www.firecore50.com/

First place I would look, you may know them from Moparts.

Bill