|
07-31-2015, 07:52 PM | #1 |
Junior Member
Join Date: Dec 2012
Posts: 42
Likes: 0
Liked 0 Times in 0 Posts
|
Caltracs setup
I just put caltracs on my 1970 duster. I'm running the stock springs. I have them set at the baseline that they gave me. And it's unloading the tires any ideas on what to change?
|
07-31-2015, 09:03 PM | #2 |
VIP Member
Join Date: Dec 2007
Location: Arizona, Texan forever
Posts: 1,114
Likes: 705
Liked 456 Times in 172 Posts
|
Re: Caltracs setup
Split leaf springs and Cal trac.shocks will fix.thr.problem
__________________
Gary Hansen - SS/FA 4911, B/SA 4911 |
07-31-2015, 09:21 PM | #3 |
Senior Member
Join Date: Jan 2002
Location: North Attleborough Ma.
Posts: 522
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Caltracs setup
What torsion bars do you have? I had this problem with the V-8 bars, put 6cly bars in and that solved the problem.
I know of a few guys who couldn't get the cal tracs to work with the stock mopar springs. If you are going to run that setup you need all the recommended cal trac stuff, springs, shocks front and rear.
__________________
GEORGE MIRZA STK 1236 |
08-07-2015, 04:44 PM | #4 | |
VIP Member
Join Date: Apr 2003
Location: Tulsa, Oklahoma
Posts: 1,565
Likes: 3,120
Liked 676 Times in 289 Posts
|
Re: Caltracs setup
Quote:
Good Luck, Bill |
|
Thread Tools | |
Display Modes | |
|
|