|
07-29-2015, 11:33 PM | #1 |
VIP Member
Join Date: Aug 2002
Location: Fayetteville, n.c.
Posts: 1,411
Likes: 0
Liked 1 Time in 1 Post
|
G body manual brake master cylinder
Looking for a kit. Wanting to remove the booster from the Monte. Where can I find a kit with plate, push rod, and master cylinder, that's easy to install
|
07-30-2015, 07:32 AM | #2 |
VIP Member
Join Date: Oct 2002
Location: On a hilltop in Pa.
Posts: 4,212
Likes: 3,066
Liked 6,730 Times in 1,512 Posts
|
Re: G body manual brake master cylinder
Look at the "Under the Index for Under a Grand" thread. Quick and easy AND safe. BTW, I never even took the orig. MC off of the car.
__________________
Billy Nees 1188 STK, SS Make tech "TECH" again! |
08-01-2015, 09:50 AM | #3 |
Junior Member
Join Date: Sep 2003
Location: Indianapolis
Posts: 28
Likes: 0
Liked 0 Times in 0 Posts
|
Re: G body manual brake master cylinder
I took a m/c off an '81 Chevy truck with manual brakes (aluminum / plastic) with the pushrod and pushrod retainer, had to fab up the mount plate and customize the rod length, no differential valve at all, works well.
Whatever you do, don't forget to positively retain the m/c push rod. About $40 for a new m/c once I fitted it all up. |
08-01-2015, 02:14 PM | #4 |
VIP Member
Join Date: Jun 2006
Posts: 3,347
Likes: 308
Liked 279 Times in 149 Posts
|
Re: G body manual brake master cylinder
Go to Advance Auto Parts --- part number 10-1737 1978-1987-G body MANUAL BRAKES master cylinder--- $26.49---FED 387
|
08-01-2015, 02:30 PM | #5 | |
Veteran Member
Join Date: Mar 2002
Location: Miles From Nowhere
Posts: 7,391
Likes: 2,563
Liked 4,411 Times in 1,682 Posts
|
Re: G body manual brake master cylinder
Quote:
I did one like this back in about 1985. Never had a problem. You could drill the hole in the piston deeper and use a longer rod, if it makes you feel better, but not necessary if you use a retainer and WELD it all together. No threaded adjusters I don't believe you will need to buy a manual m/c. Made it even easier: http://classracer.com/classforum/sho...t=44903&page=3
__________________
We are lucky we don't get as much Government as we pay for..... Will Rogers Last edited by Mark Yacavone; 08-01-2015 at 02:38 PM. |
|
Thread Tools | |
Display Modes | |
|
|