2014 cj power windows

Mike Graham · 04-30-2024, 03:31 PM

Trying to get windows to work on this car, checked all the usual suspects. Fuses/power
Is there some sort of interlock on these cars that keep the windows from working?

Kirk Morgan · 04-30-2024, 07:05 PM

I went to the Ford Racing site and printed the wiring diagram for my 2013 CJ. I looked at the 2014 and a diagram wasnt listed. The switches send a ground signal to a relay or module to operate the windows.

Mike Graham · 05-01-2024, 12:49 AM

Thanks Kirk. I have those diagrams. I have checked power and ground on motor and switch. Do you know if the signal goes to the BCM?

RKelliher · 05-01-2024, 07:36 AM

If oe system ,may need BCM to be programed. I know on GM if you change switch bcm must be reprogramed

Robin Lawrence · 05-01-2024, 07:38 AM

The BCM is not required for the windows. The door harnesses use the door handle switch to activate the drop in the window as the door is opened to clear the door seal.

When I built my CJ I used the stock connectors in the door jambs. There are a couple of wires from the driver side that are needed to mate the system. I powered the positives in the wires that went through the stock harness in the door jambs and it all worked.

Before I was able to complete the wiring I located a NOS CJ Harness and used that.

Robin

Mike Graham · 05-01-2024, 09:58 AM

Robin
This car appears to have the stock harness in it. Do you remember what wires had to be connected? I don't see anything in the Dunn Rite schematics.
Thanks

Kirk Morgan · 05-01-2024, 02:02 PM

Mike give me a call i can tell you what i did when RJ and i built a 2010 CJ from scratch. I made all the wiring harnesses. 210-887-3331

04-30-2024, 03:31 PM	#1
Mike Graham Member Join Date: Jul 2002 Posts: 388 Likes: 1 Liked 299 Times in 56 Posts	2014 cj power windows Trying to get windows to work on this car, checked all the usual suspects. Fuses/power Is there some sort of interlock on these cars that keep the windows from working?

04-30-2024, 07:05 PM	#2
Kirk Morgan Member Join Date: Jan 2009 Posts: 195 Likes: 0 Liked 52 Times in 30 Posts	Re: 2014 cj power windows I went to the Ford Racing site and printed the wiring diagram for my 2013 CJ. I looked at the 2014 and a diagram wasnt listed. The switches send a ground signal to a relay or module to operate the windows.

05-01-2024, 12:49 AM	#3
Mike Graham Member Join Date: Jul 2002 Posts: 388 Likes: 1 Liked 299 Times in 56 Posts	Re: 2014 cj power windows Thanks Kirk. I have those diagrams. I have checked power and ground on motor and switch. Do you know if the signal goes to the BCM?

05-01-2024, 07:36 AM	#4
RKelliher Member Join Date: Dec 2013 Posts: 141 Likes: 28 Liked 148 Times in 48 Posts	Re: 2014 cj power windows If oe system ,may need BCM to be programed. I know on GM if you change switch bcm must be reprogramed

05-01-2024, 07:38 AM	#5
Robin Lawrence Sponsor Join Date: Jan 2002 Location: Galesburg IL. Posts: 165 Likes: 214 Liked 637 Times in 109 Posts	Re: 2014 cj power windows The BCM is not required for the windows. The door harnesses use the door handle switch to activate the drop in the window as the door is opened to clear the door seal. When I built my CJ I used the stock connectors in the door jambs. There are a couple of wires from the driver side that are needed to mate the system. I powered the positives in the wires that went through the stock harness in the door jambs and it all worked. Before I was able to complete the wiring I located a NOS CJ Harness and used that. Robin __________________ STK 308 SS 3088

05-01-2024, 09:58 AM	#6
Mike Graham Member Join Date: Jul 2002 Posts: 388 Likes: 1 Liked 299 Times in 56 Posts	Re: 2014 cj power windows Robin This car appears to have the stock harness in it. Do you remember what wires had to be connected? I don't see anything in the Dunn Rite schematics. Thanks

05-01-2024, 02:02 PM	#7
Kirk Morgan Member Join Date: Jan 2009 Posts: 195 Likes: 0 Liked 52 Times in 30 Posts	Re: 2014 cj power windows Mike give me a call i can tell you what i did when RJ and i built a 2010 CJ from scratch. I made all the wiring harnesses. 210-887-3331