|
02-11-2017, 09:21 PM | #1 |
Member
Join Date: Jul 2007
Location: Georgia
Posts: 154
Likes: 2
Liked 30 Times in 9 Posts
|
Rochester 2gc - Chevy 400
Anyone have a 1970-75 Chevrolet parts book that confirms which part numbers were on the Chevy 400 2gc? Trying to confirm which CFM carbs were available. On the blue print specs it only shows a 1.25 carb which I believe is the 381 cfm.
Thanks,
__________________
Michael Brand II 505B - F/SA |
02-11-2017, 09:45 PM | #2 |
VIP Member
Join Date: Nov 2008
Location: Glendora,Calif.
Posts: 1,111
Likes: 164
Liked 649 Times in 208 Posts
|
Re: Rochester 2gc - Chevy 400
Look out for an OEM carb, then measure the ventures. Some of these are the 1.375" venturi, and the alternate carbs shown on the blueprint specs on your Tech Bulletin specify the smaller venturi,even though the car originally came with the larger one. Some replacement parts differed from the OEM.
|
02-11-2017, 11:54 PM | #3 |
Senior Member
Join Date: Jun 2011
Location: Langley (no igloos), British Columbia, Canada
Posts: 551
Likes: 269
Liked 228 Times in 78 Posts
|
Re: Rochester 2gc - Chevy 400
Michael… 1970: 7040117, 7040118, 7040119, 7040120. 1971: 7041118, 7041137. 1972: 7042118, 7042838. 1973: 7043118, 7043119. 1974: 7044118. 1975: (4 barrel only). 1.25=381cfm, 1.312=423cfm, 1.375=435cfm. The are all referred to as "Large Base" starting in 1970. I hope this helps…Maurice.
Last edited by MAURICE BLENDHEIM; 02-12-2017 at 12:12 AM. |
02-12-2017, 12:33 AM | #4 |
Member
Join Date: Mar 2006
Location: EL PASO, TEXAS
Posts: 156
Likes: 0
Liked 2 Times in 2 Posts
|
Re: Rochester 2gc - Chevy 400
Maurice, what is the test pressure being used to arrive at those flow numbers?
|
02-12-2017, 01:48 AM | #5 |
VIP Member
Join Date: Jun 2006
Posts: 3,349
Likes: 328
Liked 280 Times in 150 Posts
|
Re: Rochester 2gc - Chevy 400
3.0-fed387
|
02-12-2017, 11:33 AM | #6 |
Member
Join Date: Mar 2013
Location: Greentown, IN
Posts: 113
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Rochester 2gc - Chevy 400
|
02-12-2017, 11:38 AM | #7 |
Senior Member
Join Date: Sep 2007
Posts: 574
Likes: 6
Liked 44 Times in 22 Posts
|
Re: Rochester 2gc - Chevy 400
Under vacuum, 3" was used for 2 bbl since originally at WOT that was about the vacuum achieved; 1.5" was used for 4 bbl carbs. The conversion factor is discussed in Doug Roe's book, and for example the 1-3/16" venturi carbs would give 247 cfm on the 4 barrel scale, 1-5/16 about 299, and the 1.25" iirc around 280.
|
02-13-2017, 05:40 PM | #8 |
Member
Join Date: Jul 2007
Location: Georgia
Posts: 154
Likes: 2
Liked 30 Times in 9 Posts
|
Re: Rochester 2gc - Chevy 400
Thanks for the help so far. The particular carb number that is listed for the 74' 400 is 7044118. If anyone has this carb laying around can you please measure the venturi size for me?
__________________
Michael Brand II 505B - F/SA Last edited by M Brand 505B; 02-13-2017 at 07:01 PM. Reason: Typo |
02-18-2017, 10:35 AM | #9 |
Senior Member
Join Date: Nov 2007
Location: Div. 6, Eastern, WA
Posts: 694
Likes: 2,257
Liked 219 Times in 105 Posts
|
Re: Rochester 2gc - Chevy 400
__________________
Dave Noll, E/FS ,L/SA 6526 |
|
|