CLASS RACER FORUM
Page 13 of 20 « First 31112 13 1415 Last »
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock (https://classracer.com/classforum/forumdisplay.php?f=3)
-   -   Attention Nova 350/255 stock combo. (https://classracer.com/classforum/showthread.php?t=74142)

SSDA Hemi 09-15-2019 07:15 PM
Re: Attention Nova 350/255 stock combo.
 
Quote:
Originally Posted by FED 387 (Post 597683)
In COMP any run in eliminations quicker than .500 under the index is readjusted for the next round ---so if a competitor runs say -.502 under his class index then the next round his index is lowered .02---If any competitor should run -.601 during eliminations or quicker the permanent index for that class will be lowered .01 for THE ENTIRE CLASS AFTER the completion of the current race--in no case will the class index be lowered more than .05 at any time in one readjustment for the ENTIRE class but the racer that committed a run of .601 or more will have his PERSONAL INDEX permanently lowered .01 or whatever the infraction was. FED 387

Mineshaft was in effect and permanent CIC for the car began at .65 under. Martino took .03 permanent off his personal index as long as he's driving in C/SM. Permanent hits to everyone in class begins at runs under .72 under original class index.

Complicated Eliminator LOL!

G Schenck 09-15-2019 07:15 PM
Re: Attention Nova 350/255 stock combo.
 
Quote:
Originally Posted by Mike Jones (Post 597682)
I don`t know if anything will be done to "level" the playing field in Stock and Super Stock. How NHRA did it in Comp at Maple Grove, was to make Tom Martino`s ( #2 -.716) index go from 8.85 in RD1 to 8.67 (-.180) in the Final. Not sure if it is his personal index and/or if C/SM got whacked, but that's brutal. Spread between #1 (-.740) and #21 (-.498) is .242.
Mike A114
In the third round Tom went -.52 under which lowered his index .02 for the semi final against Aragona. In that round he went .66 under which lowered it another .16 hence the -.18 in the finals. He will have his personal index lowered .08 come tomorrow and the class index will remain the same. But in Aragona's case, he already had 10 personal against him and he ran -.69 vs Tom so he will move the J/AA class index another .09 down.

Greg

ps if you have no personal index, you have to run -.71 under to move the class index

Mike Jones 09-15-2019 07:23 PM
Re: Attention Nova 350/255 stock combo.
 
Quote:
Originally Posted by G Schenck (Post 597691)
In the third round Tom went -.52 under which lowered his index .02 for the semi final against Aragona. In that round he went .66 under which lowered it another .16 hence the -.18 in the finals. He will have his personal index lowered .08 come tomorrow and the class index will remain the same. But in Aragona's case, he already had 10 personal against him and he ran -.69 vs Tom so he will move the J/AA class index another .09 down.

Greg

ps if you have no personal index, you have to run -.71 under to move the class index
Why .08 on the personal? If mineshaft is in effect, -.65, wouldn`t C/SM lose.01?
Complicated for me

Frank Castros 09-15-2019 07:39 PM
Re: Attention Nova 350/255 stock combo.
 
There is a Comp forum on this site that is under utilized, so maybe this subject matter might enhance its existence.

bubski 09-15-2019 08:51 PM
Re: Attention Nova 350/255 stock combo.
 
Keep pissing in their Cherios Billy !! seems like a lot of guys better get off the computer n get on the dyno !!

HP HUNTER 09-15-2019 10:58 PM
Re: Attention Nova 350/255 stock combo.
 
Quote:
Originally Posted by rick winchester (Post 597676)
If you have 20k stocker heads and 2k intake you have to much money ……..might need your head checked. Rick.
How many of you understand what really goes into a very well developed set of heads? I don't mean the run of the mill good set of heads, I mean the best of the best. It would be NOTHING to have 200 hours in a killer set of heads, in many cases welding is required, on and off the flow bench many many times per port X 16, then theres getting the right castings to start with, it goes on and on. And don't kid yourself flow through the intake tract is every thing on a stocker. What your time worth? As a side note, theres no old school small block Chevy head that responds (flows) like certain castings of the 441 used on that 255 HP combo, head porters know exactly what I'am talking about!

kansas stocker 09-15-2019 11:28 PM
Re: Attention Nova 350/255 stock combo.
 
"in many cases welding is required, "

Silly me. I didn't know that that was legal. Why don't we just throw all the rules away?

Pete

Billy Nees 09-16-2019 07:24 AM
Re: Attention Nova 350/255 stock combo.
 
Quote:
Originally Posted by bubski (Post 597700)
Keep pissing in their Cherios Billy !! seems like a lot of guys better get off the computer n get on the dyno !!
Hey bubski, let me know who they are and I'll personally stop by their pit and piss on their sneakers. What's a dyno?

Billy Nees 09-16-2019 07:26 AM
Re: Attention Nova 350/255 stock combo.
 
Quote:
Originally Posted by HP HUNTER (Post 597720)
How many of you understand what really goes into a very well developed set of heads? I don't mean the run of the mill good set of heads, I mean the best of the best. It would be NOTHING to have 200 hours in a killer set of heads, in many cases welding is required, on and off the flow bench many many times per port X 16, then theres getting the right castings to start with, it goes on and on. And don't kid yourself flow through the intake tract is every thing on a stocker. What your time worth? As a side note, theres no old school small block Chevy head that responds (flows) like certain castings of the 441 used on that 255 HP combo, head porters know exactly what I'am talking about!
and that welding can be detected if NHRA wanted it to be.

Dan Fahey 09-16-2019 08:30 AM
Re: Attention Nova 350/255 stock combo.
 
Quote:
Originally Posted by Billy Nees (Post 597728)
Hey bubski, let me know who they are and I'll personally stop by their pit and piss on their sneakers. What's a dyno?
A legal way to help find more power..!:o


All times are GMT -4. The time now is 05:19 AM.
Page 13 of 20 « First 31112 13 1415 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.