CLASS RACER FORUM
Page 14 of 42 « First 41213 14 151624 Last »
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock (https://classracer.com/classforum/forumdisplay.php?f=3)
-   -   Important if you run D-H/S or SA (https://classracer.com/classforum/showthread.php?t=65136)

James L Miller 02-07-2017 11:47 AM
Re: Important if you run D-H/S or SA
 
Quote:
Originally Posted by older racer (Post 526170)
hmmm, I looked at two 340 intakes, the 2100 and the 025 , they have no notches. the 2100, is for 71 and 72 340. just observation from the field.
I don't think any of the factory SB Mopar intakes had a notch. Maybe the 2bbl intakes, but it's been a long time since I've seen one of those.

David Hakim 02-07-2017 02:57 PM
Re: Important if you run D-H/S or SA
 
I don't have a dog in this fight but I'll point out that no 340 four-barrel engine had an Edelbrock intake bolted on when it rolled off Chrysler's Mound Road Engine Plant in Detroit.

The Chrysler part number cast onto the runner was there for two reasons.

1. To make the manifold legal in Super Stock back in the day.

2. For sale through dealers during the Hustle Stuff (and later Direct Connection) parts programs.

Just pointing out factual history and not distorting it.

You know, like when the Germans bombed Pearl Harbor...

4406mopar 02-07-2017 03:16 PM
Re: Important if you run D-H/S or SA
 
And all those power glide only cars did not come out of the factory with a 3 speed, but they can run one now. What's the difference?

No difference it's all BS

Fast guys will still be fast intake or not. But that extra gear really changes the car.

Michael Beard 02-07-2017 03:41 PM
Re: Important if you run D-H/S or SA
 
Correct. Powerglide-only cars should not be allowed to run a 3 speed, and 340 cars should not be able to run an intake that didn't come on them. Two wrongs don't make a right.

Moot point, I guess. I'm one of the few (apparently) that ever got fed up enough with NHRA to take my money elsewhere.

Bob Mulry 02-07-2017 03:50 PM
Re: Important if you run D-H/S or SA
 
Quote:
Originally Posted by 4406mopar (Post 526212)
And all those power glide only cars did not come out of the factory with a 3 speed, but they can run one now. What's the difference?

No difference it's all BS

Fast guys will still be fast intake or not. But that extra gear really changes the car.


I didn't think it would have to be explained, but I will try......

The transmission rule change, which I don't agree with, was not made for one specific application, unlike the MOPAR manifold rule change....

The transmission change will mean that if a racer wants to build a racecar with a MOPAR PowerFlite or FORD Ford-O-Matic 2 speed transmissions they can upgrade to a 3 speed...

This manifold change ONLY benefits MOPAR and is not an across board rule change....

See the difference??????

older racer 02-07-2017 04:08 PM
Re: Important if you run D-H/S or SA
 
as for this for only one car, chev guys whined and got the jerico trans ok'd for them, ford and mopar cars didn't need them. seems to be some hypocrisy. sounds like liberals, do as I say, not as I do???

Paul Precht 02-07-2017 04:28 PM
Re: Important if you run D-H/S or SA
 
Quote:
Originally Posted by Bob Mulry (Post 526220)


I didn't think it would have to be explained, but I will try......

The transmission rule change, which I don't agree with, was not made for one specific application, unlike the MOPAR manifold rule change....

The transmission change will mean that if a racer wants to build a racecar with a MOPAR PowerFlite or FORD Ford-O-Matic 2 speed transmissions they can upgrade to a 3 speed...

This manifold change ONLY benefits MOPAR and is not an across board rule change....

See the difference??????
There are no 50s Mopars listed in the guide.

Billy Nees 02-07-2017 06:05 PM
Re: Important if you run D-H/S or SA
 
Quote:
Originally Posted by 4406mopar (Post 526212)
And all those power glide only cars did not come out of the factory with a 3 speed, but they can run one now. What's the difference?
While we're on the transmission deal maybe all of the 340 cars should go back to their 727 torqueflites too!

Bob Mulry 02-07-2017 06:41 PM
Re: Important if you run D-H/S or SA
 
Quote:
Originally Posted by older racer (Post 526221)
as for this for only one car, chev guys whined and got the jerico trans ok'd for them, ford and mopar cars didn't need them. seems to be some hypocrisy. sounds like liberals, do as I say, not as I do???


I guess that you are an "Older Racer"???????

I wouldn't think that a top loader or hemi 4 speed would be in any of the faster Mopar or Ford Stockers???????

I could be wrong??????

They could run one if they wanted.....

I'm not sure how to make that manifold fit on a Chevy or Ford??????

Jim Storms 02-07-2017 06:48 PM
Re: Important if you run D-H/S or SA
 
IS THIS STILL CLASS RACER??????

Seems like it's Kindercare now.... my lord.


All times are GMT -4. The time now is 01:28 AM.
Page 14 of 42 « First 41213 14 151624 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.