CLASS RACER FORUM
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Steel head shim ??? (https://classracer.com/classforum/showthread.php?t=12127)

Bub Whitaker 08-02-2008 10:00 PM
Re: Steel head shim ???
 
Quote:
Originally Posted by Woodro Josey (Post 77831)
Yep excuse me Bub, i am not saying thats the right thing to do, but the amount of flow lost to having bent valves, i think i would face the valves if all else has been tried, either on top side or with a valve refacer, whatever he has access to,! But then what do i know!!!!!!! lol
You know too much! hope I can retain as much as you've forgotten, but your correct that is the easy quick fix... I'm just use to doing these stocker engines and makin the heads fit the shortblock after it's assembled

art leong 08-03-2008 12:08 PM
Re: Steel head shim ???
 
Thanks guys. I can't do much with my existing pistons The cam I'm running would check legal in a stocker.
And I'm running a modified production motor class. I talked to JE and they can make a piston for me that will take up to .500 lift with a normal head gasket .045 and have 14 1/2 to 1 compression.
But that will be over the winter.
For now I'll just try to learn the ins and outs of this combo. Then build a killer motor and really learn how to go slow(but I have a head start in knowing how to slow it up)
Thanks again.


All times are GMT -4. The time now is 06:28 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.