CLASS RACER FORUM
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock (https://classracer.com/classforum/forumdisplay.php?f=3)
-   -   Richardson SS/AS Camaro (https://classracer.com/classforum/showthread.php?t=17192)

Joe Pinkston 04-22-2009 07:07 PM
Re: Richardson SS/AS Camaro
 
Sean; why do you want to see a pic of this car? Oh yeah, it's a real race car (i.e. Chevrolet). LOL

Here's the link to the pic on DRC.http://dragracecentral.com/DRCPhoto....r=100#indextop






Dan Moore is #1 !!!! :D

Sean Ward 04-22-2009 07:32 PM
Re: Richardson SS/AS Camaro
 
OH YEAH i saw that car in Valdosta

Tracy Robbins 04-22-2009 07:52 PM
Re: Richardson SS/AS Camaro
 
Quote:
Originally Posted by keith ohanesian (Post 116811)
What I think is great is that a "69 Camaro" is waking up this other wise dead class!! Look out little Seabring a big fat red CAMARO is lurking in the back round.... lol
There would be more in this class if they would do away w/ or lower the minimum weight...wonder why it's not lbs per cubic inch anyway?

herbjr 04-22-2009 08:26 PM
Re: Richardson SS/AS Camaro
 
It is 8.50 per cu in. It just has a min.

MEMORIES 04-22-2009 08:33 PM
Re: Richardson SS/AS Camaro
 
Quote:
Originally Posted by herbjr (Post 116440)
Gary Wisecarver changed alot on the car and they have been testing some at Piedmont. That car works very well.
Is this the same Wisecarver that ran IHRA Hot Rod class in the eighties? I think his wife had a car too.

Wayne.

keith ohanesian 04-22-2009 09:10 PM
Re: Richardson SS/AS Camaro
 
Tracy its 8.50 per cid. Min is 3180 no mater how small you are with an auto. I know this class very well, more than most. The biggest reasons are purpose built motors and old b/a motors. That car is fast I love it now there is some competion in ss/as.

RPM5595 04-22-2009 09:34 PM
Re: Richardson SS/AS Camaro
 
I have it on good authority that someone is building a FORD of all things for this class. Should be out mid summer and may actually run pretty good. Hmmmmm.

Jay

Tracy Robbins 04-22-2009 09:59 PM
Re: Richardson SS/AS Camaro
 
I understand the 8.50 per ci rule, just wish you could go below minimum. At that minimum the smallest engine you can build is 394. I considered running it but had to give up too much weight for my little 362 and wouldn't come close to being competitive. Just my opinion because based on my combination...a little biased I guess.

herbjr 04-23-2009 06:44 AM
Re: Richardson SS/AS Camaro
 
Not the Wisecarver that ran hot rod but his brother gary. Gary ran some SS back then. Tracy remember on Sunday SS is a Shoe Polish race, Anthony just won Atlanta going 9.50 in SS/AS

Michael Lyons 04-23-2009 08:08 AM
Re: Richardson SS/AS Camaro
 
The biggest engine I ever ran in AS is 380". And it was a beater engine with 4 sleeves, a big crank and steel rods. And a powerglide. But I went 8.92 in TX with it in 05. However the extra weight turns out was hard on them pinion gears :P I went 9.08 with my 352" in AS last year at Milan too.

Anthony told me last year he was building a Cobalt for AS. Not sure where it is, if something changed, or he was just bs'in me... whatta you think?


All times are GMT -4. The time now is 08:59 AM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.