Re: TH-350, how long should the shift take.
 

I have a dumb ?

the rpm spikes to 6000 then looks to turn down to 5700 before going up. What does this mean if anything??

Re: TH-350, how long should the shift take.
 

Chad,

PM

Bill

Re: TH-350, how long should the shift take.
 

Chad, based on what I'm seeing on your graph the shifting looks fine compared to what I've seen on others and my own after some tweaks. Looks like you have a 6100-6200 converter based on the dropback, also looks like you're over reving it a bit if the white line is the accelerometer you can see it starting to drop off rapidly just prior to the shift. I'm sure there are guys here with alot more experience than me on this but it looks pretty good to me. Joe

Re: TH-350, how long should the shift take.
 

yes, on that pass i most definitely overwound 1st on that pass

Re: TH-350, how long should the shift take.
 

On my set up when I was having trouble I would see a sharp dip on my Accel. trace, I could also actually "hear" it making the shift, it definately was not a clean change in ratio. Looks like you have that thing hooked up. Joe

Re: TH-350, how long should the shift take.
 

PM replied