CLASS RACER FORUM
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Locking Trans Dip Stick (https://classracer.com/classforum/showthread.php?t=24425)

superdiv1 03-31-2010 05:56 PM
Re: Locking Trans Dip Stick
 
Quote:
Originally Posted by Kent Hanley (Post 175515)
Lokar has a flexible dip stick tube but its a pain to install. You have to remove the pan, so you can bolt it to the case. Of course it doesnt push in easy , you really have to work with it. I was replacing my non locking Lokar dip stick tube with the locking one and the bracket doesnt match up. So you have to drill new holes for the bracket. All this and its not easy to read, i dont know why other than the tube hangs so low in to the pan. But its flexible, its got that going for it. oh yea its also over $110
wish i would have seen this before. i just got mine in the mail today. definately not dealing with this mess now.

Rick Paton 05-13-2010 07:44 PM
Re: Locking Trans Dip Stick
 
Quote:
Originally Posted by Ross Family Racing (Post 175377)
Does Lokar have an application fot the 904 Torqueflites? I was on their website and did not see one.
Jeff Ross
Hi Jeff

Lokar makes one for the 350 turbo. Dave Smith at Pro Trans and me turned down the pan nut and slotted it to tighten it. No problems so far.

ss/as 6777
Rick Paton

bad440 05-14-2010 11:52 AM
Re: Locking Trans Dip Stick
 
Quote:
Originally Posted by Ross Family Racing (Post 175377)
Does Lokar have an application fot the 904 Torqueflites? I was on their website and did not see one.
Jeff Ross
they had a listing on ebay yesterday.65.00 buy it now price.
bad440

Michael Beard 01-07-2011 10:12 PM
Re: Locking Trans Dip Stick
 
How'd you make out on this one, Jeff?

70AARCuda 01-08-2011 02:42 AM
Re: Locking Trans Dip Stick
 
Quote:
Originally Posted by Ross Family Racing (Post 174936)
Does anyone make a flex assembly that will pass the rule for locking transmission dip sticks. We currently run a unit purchased from Mancini Racing and the stick is sealed with o-rings and fits tight,hafta really tug on it, to get it out. The standard tube style will not work in our Avenger because the mid mount is in the way. Any suggestions?
Jeff Ross
ATI- 973081 Dipstick Tube Lock for about 10 bucks...

replaces dipstick ....

http://www.summitracing.com/parts/ATI-973081/

cad 01-08-2011 09:22 AM
Re: Locking Trans Dip Stick
 
If you just need the stick....all GM dipsticks look exactly like that.
I used to work at a chevy parts dept.
Just ask the parts guy to take you the parts bins under section 4.020.
They are under $10.
There are a couple size ODs, so measure what you need and stop in to the Chevy dealer. If they only have long ones, you can drill out the rivets and whoala.

Clark

tpoh815 01-09-2011 01:25 PM
Re: Locking Trans Dip Stick
 
The chevy one cad is talking about is the way to go . Just compare them side by side and cut to length or trim then etch or scribe the full/add line on it ! Hope this helps.


All times are GMT -4. The time now is 05:03 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.