CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   EGT sensor plugs (https://classracer.com/classforum/showthread.php?t=24930)

Rich Biebel 04-07-2010 11:39 AM

Re: EGT sensor plugs
 
When I raced my LT-1 Stocker......I used an LM-1 to record my A/F ratio. Since the O2 sensor needed to be powered up thru the LM-1 I only used it on Time runs. I removed the sensor and installed a plug.......coated it with a high temp anti-seize compound and never had any problem removing either the plug or sensor. I used the anti sieze paste that is either aluminum or copper colored. I use it all the time at work on various items....I like using it on engine driven welders at the outlet studs where the cables are connected......these machines are used outdoors and everything seizes up from rust and corrosion....


All times are GMT -4. The time now is 08:55 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.