CLASS RACER FORUM
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   sbc horsepower? (https://classracer.com/classforum/showthread.php?t=29663)

james schaechter 11-14-2010 09:17 PM
Re: sbc horsepower?
 
Quote:
Originally Posted by KingReptile (Post 222147)
Well the guy was wanting horsepower numbers mine are real no use in arguing with you.A real dyno a 327 should make 420 I know Jims 283 pb make 370 .
Calm down Tommy :)

My 283 shows a lot higher than that on the dyno we use. I bet Wade's shows lower numbers and it still eats my lunch in the hp department. Go figure.

KingReptile 11-14-2010 09:20 PM
Re: sbc horsepower?
 
[QUOTE=james schaechter;222162]Calm down Tommy :)

I dont get wound up do I lolll :)

danny waters sr 11-14-2010 09:30 PM
Re: sbc horsepower?
 
I bet mine is probably the lowest of them all. lol

KingReptile 11-14-2010 09:43 PM
Re: sbc horsepower?
 
I think I could fix you up if you wanna dump some coin??

Mike Walter 11-14-2010 09:43 PM
Re: sbc horsepower?
 
Quote:
Originally Posted by nolongerracing (Post 222054)
I guess WJ needs to get his dyno calibrated too...lol It doesn't really matter what a motor makes on a dyno, its how fast it runs. Always use the same dyno when testing and try to improve on what you have. After all, its the improvements that make you faster.

dyno, racetrack, dyno, racetrack, dyno, etc, etc, ect,.....
The info you stated about using the same dyno is really true, and knowing what YOUR numbers mean on the time slip will always rule the day.

I've built a number of these motors and the one I just finished makes 415 w/ break-in oil. It will be going in a 67 Chevy II so when it's done maybe we can compare sheets & slips?

danny waters sr 11-14-2010 09:59 PM
Re: sbc horsepower?
 
Quote:
Originally Posted by KingReptile (Post 222170)
I think I could fix you up if you wanna dump some coin??
Sounds good to me ,but i have just about dumped out.lol. You got a pay as you race plan ? lol again.

KingReptile 11-14-2010 10:01 PM
Re: sbc horsepower?
 
Quote:
Originally Posted by danny waters sr (Post 222179)
Sounds good to me ,but i have just about dumped out.lol. You got a pay as you race plan ? lol again.
Oh I understand theres a reason why havent been out cost money and u know it doesnt come easy..

KingReptile 11-14-2010 10:05 PM
Re: sbc horsepower?
 
xxxxxxxxxx

KingReptile 11-14-2010 10:07 PM
Re: sbc horsepower?
 
Quote:
Originally Posted by Mike Walter (Post 222171)
The info you stated about using the same dyno is really true, and knowing what YOUR numbers mean on the time slip will always rule the day.

I've built a number of these motors and the one I just finished makes 415 w/ break-in oil. It will be going in a 67 Chevy II so when it's done maybe we can compare sheets & slips?

I didnt think I was far off... Been a long time Mike would like to talk sometime :) Thanks for backing me up :)


All times are GMT -4. The time now is 02:03 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.