Re: Looking for Vintage Racing Wheel
 

Here's a pair of Flys,15X3.5 on Racing Junk Ad #2128444

There's a pair of 15X4 Spyders on this site www.akhwheels.com/pages/inventory.php?cat=5

Re: Looking for Vintage Racing Wheel
 

www.akhwheels.com/pages/inventory.php?cat=5

Check out this inventory.They have Motor Wheel Spyders in Magnesium.

Re: Looking for Vintage Racing Wheel
 

Make sure if you get the "flys" that either you buy the lug nuts with them as they are a .750 shank diameter or;

1) you have the wheels bushed to the standard lug shank size.
2) talk to Travis at Mark Williams who can make you a set of big .750 studs (for the rears) that will work with these wheels.

Flys like neither lateral stress or potholes. Also I would avoid the magnesium fronts without the red epoxy in the centre. Not as strong.

Re: Looking for Vintage Racing Wheel
 

I have a set of Fly's that we are getting ready to sell - Magnesium 3.5" fronts (with red foam) and 15X8 rears. With lug nuts and center caps - full blown Nostalgia - they still have 30yr old M&H's on the rears and they hold air! If any is in the market met me know. (GM bolt pattern). I need to pull them out and measure backspacing on rears and get pictures. Only bad is that the rears have screws in the bead.

Re: Looking for Vintage Racing Wheel
 

I went to the AKH website and they have some great stuff. Being an old Mopar guy I was happy to see vintage Keystone wheels and caps which are a very rare find.

Re: Looking for Vintage Racing Wheel
 

here's some flys...
http://cgi.ebay.com/ebaymotors/ws/eB...K%3AMEWAX%3AIT


(not mine,ok?)