CLASS RACER FORUM
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Converter recomendation (https://classracer.com/classforum/showthread.php?t=34888)

Lonnie Cox 07-31-2011 12:58 PM
Re: Converter recomendation
 
Quote:
Originally Posted by Mark Yacavone (Post 271510)
Lonny ,
I would want to know the duration @ .050 , how "good " the heads and intake are, and if you are using Shubeck style lifters and a lot of spring pressure. In other words, do you plan on revving it up?
My cam card reads
Gross valve lift int .391 exh .411
Dration @
.020 Tappet Lift int 281 exh 290
Valve timing open close
@ .050 int 20 btdc 54 abdc
exh 59 bbdc 25 atdc
These specs are for cam installed @ 107 intake center line
Duration @ .050 int 254 exh 264
Lobe Lift .2610 .2740
Lobe separation 107.0

Heads have Comp valve job
Springs Beehive 125lb @ 1.800,bronz guides,screw in studs , guide plates,manley ss 195/150 valves
Intake stock just block off egr.
Thanks for all your help.;)

greg fulk 08-01-2011 12:25 AM
Re: Converter recomendation
 
WOW on the cam!

Ed Wright 08-01-2011 12:45 AM
Re: Converter recomendation
 
Quote:
Originally Posted by greg fulk (Post 272290)
WOW on the cam!
Really!!

Robert Simpson 08-01-2011 08:46 AM
Re: Converter recomendation
 
Quote:
Originally Posted by Ed Wright (Post 272291)
Really!!
Which part is wow?


All times are GMT -4. The time now is 10:22 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.