CLASS RACER FORUM
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   327 MLS Head Gasket - Reuseable? (https://classracer.com/classforum/showthread.php?t=39709)

Mark Yacavone 03-23-2012 12:59 AM
Re: 327 MLS Head Gasket - Reuseable?
 
Quote:
Originally Posted by Lew Silverman (Post 316946)
Mark,

I know I'm giving up a little bit of compression by going to the .040 MLS gasket, the theory being that they might seal better than the steel-shim OE-style .018 spec gasket. The deck height was set at the .002 called for in the engine guide.

Lew
Lew, If you can't see the piston top imprinted on the head, they're too far away!!

Pedigo Perf 03-23-2012 07:31 AM
Re: 327 MLS Head Gasket - Reuseable?
 
May not be too important but I always put them back on the same side I removed the gasket from just to be safe. Copper Coat is the ticket.

TP


All times are GMT -4. The time now is 03:05 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.