CLASS RACER FORUM
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Super Stock engine rules (https://classracer.com/classforum/showthread.php?t=40102)

Tom Moock 04-10-2012 05:33 PM
Re: Super Stock engine rules
 
Jeff, The rule is called minimum compression height in stock. Tom

ss chief 04-10-2012 06:01 PM
Re: Super Stock engine rules
 
Where would one find info that allows any deck height in ss.

Jeff Lee 04-10-2012 09:57 PM
Re: Super Stock engine rules
 
Quote:
Originally Posted by Tom Moock (Post 320836)
Jeff, The rule is called minimum compression height in stock. Tom
Yes...I didn't spell it out.

rustbucket79 04-10-2012 11:22 PM
Re: Super Stock engine rules
 
Quote:
Originally Posted by bert powell (Post 320767)
I would like to make my current engine a backup, it was originally built in the late 90s. It has top dollar components but they are heavy, 820 gram rods and 570 gram pistons that were lightened. I think I can get at least 150 grams off the rod, piston and pin without hurting reliability. Don't think it will be worth any measureable power but should rev faster.
Then I would refer you to the wise words of Alan in post number 7, then consult the nearest builder with experience with your engine/class that has a few class wins. :D

GTX JOHN 04-11-2012 05:22 AM
Re: Super Stock engine rules
 
Sorry, I was confused .......thought you were talking minimum Piston to Deck
Height.


All times are GMT -4. The time now is 04:48 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.