CLASS RACER FORUM
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock (https://classracer.com/classforum/forumdisplay.php?f=3)
-   -   Problem @ Orlando Speed World (https://classracer.com/classforum/showthread.php?t=40747)

Ed Fernandez 05-13-2012 11:06 PM
Re: Problem @ Orlando Speed World
 
Is it a warantee problem that any Dodge dealer can fix?:>):>):>)










40 more to go.

NWDragracing 05-14-2012 08:40 AM
Re: Problem @ Orlando Speed World
 
It appears they are held in place with 3M body panel structural adhesive.:eek:

KRatcliff 05-14-2012 09:44 AM
Re: Problem @ Orlando Speed World
 
Quote:
Originally Posted by Ed Fernandez (Post 326391)
Is it a warantee problem that any Dodge dealer can fix?:>):>):>
It sure is, but there is no guarantee that the loaner will run the index.

Ed Fernandez 05-14-2012 09:53 AM
Re: Problem @ Orlando Speed World
 
Quote:
Originally Posted by KRatcliff (Post 326417)
It sure is, but there is no guarantee that the loaner will run the index.
The loaner is probably a new Dart.Or maybe one of those Fiat 500 tuna cans.






38 more to go.

C and W Racing 05-14-2012 10:12 AM
Re: Problem @ Orlando Speed World
 
Quote:
Originally Posted by Jim Wahl (Post 326290)
WOW Mack! Did it just fly off at speed? I also thought the hoods were one piece. The scoop looks like it was glued on! Any other damage to the paint any where else? Jim


.
The 08 Cobra Jet that I drive lost it's scoop (ironically at Orlando) going thru the finish line and yes, it bounced off of the roof and put a nice little dent in it. Thats why it now has a non painted scoop on it now. We got the replacement and didn't even bother painting it. Just bolted it on
Chuck

Jim Wahl 05-14-2012 10:22 AM
Re: Problem @ Orlando Speed World
 
Quote:
Originally Posted by C and W Racing (Post 326421)
The 08 Cobra Jet that I drive lost it's scoop (ironically at Orlando) going thru the finish line and yes, it bounced off of the roof and put a nice little dent in it. Thats why it now has a non painted scoop on it now. We got the replacement and didn't even bother painting it. Just bolted it on
Chuck
Chuck, did that happen at the SSSSA race? Jim


.

C and W Racing 05-14-2012 10:35 AM
Re: Problem @ Orlando Speed World
 
Quote:
Originally Posted by Jim Wahl (Post 326423)
Chuck, did that happen at the SSSSA race? Jim


.
No, it happened last year at a time we were part of a track rental and was testing
Chuck

Hemi Moose 05-14-2012 04:57 PM
Re: Problem @ Orlando Speed World
 
...you would think the Chrysler engineers that designed the Drag Pak hood would not take the cheap way out when designing it...the old Challenger T/A hood was a one piece deal and the Shaker hood bubbles used on the old Challenger & Cudas were fiberglass units bolted together using threaded studs & nuts...or like the fake side scoops used on the other B-body Chargers, Superbees & Road Runners etc from back then..

600ci 05-14-2012 09:02 PM
Re: Problem @ Orlando Speed World
 
My 08 CJ did the same thing at Orlando (ford sent me a new upgraded one under warranty)

Ron Ortiz 05-17-2012 03:37 PM
Re: Problem @ Orlando Speed World
 
Mack, come by my pit area, we got gum, thumb tacks, string, some paper clips, a clothes pin, and some Elmer's glue. We can have her fixed in no time.

Ron Ortiz
U/SA I knew that stuff would come in handy.


All times are GMT -4. The time now is 09:12 PM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.