CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock (https://classracer.com/classforum/forumdisplay.php?f=3)
-   -   Record Setting time in Baytown? (https://classracer.com/classforum/showthread.php?t=45937)

chlngr73 02-25-2013 06:03 PM

Re: Record Setting time in Baytown?
 
Quote:

Originally Posted by Brett C (Post 370602)
Mr. Jeff,
It appears everyone must be too busy to answer due to getting there record run stuff ready!!!

Brett Candies
4192 Stock/SS

Hey, I think ya'll should drag that COPO out and set the CC record at say about 9.20 something, yea that should work! See ya'll there, have a safe trip.

David Buckner 4772

Jeff Teuton 02-26-2013 09:49 AM

Re: Record Setting time in Baytown?
 
Well, it's getting better, low Friday 38, high 60 bright sunshine, 37 or Sat, high 60, need to set a record, start driving now for all you northern folks. Hell, I bet a bolt hole or a no bolt hole hemi SS/AH could set a record here.

Brett C 02-26-2013 11:28 PM

Re: Record Setting time in Baytown?
 
Quote:

Originally Posted by Jeff Teuton (Post 370806)
Well, it's getting better, low Friday 38, high 60 bright sunshine, 37 or Sat, high 60, need to set a record, start driving now for all you northern folks. Hell, I bet a bolt hole or a no bolt hole hemi SS/AH could set a record here.

I guess that means that we'll see a stable of those Southland Mopars all apart this weekend!

Jeff Teuton 02-27-2013 10:03 AM

Re: Record Setting time in Baytown?
 
No, I can't run 10.39 in E like the Findel's can in Minnesota. They got the record. I can't get there. Maybe if I move some bolt holes though. Hmmmmmm Correction: James Findel holds the E/SA at 10.58 and Andrew Hill holds the D/SA record at 10.39; both old cars. Hmmmmmm something amis here. Those combos need hp. F/SA is at a minimum though and I can probably run the 11.35 minimum cause of the good air. With the bolt holes removed. I bet if Andrew Hill took the bolt holes out, he could run 9.99 in D/SA.

Andrew Hill 02-27-2013 11:45 AM

Re: Record Setting time in Baytown?
 
Quote:

Originally Posted by Jeff Teuton (Post 370955)
No, I can't run 10.39 in E like the Findel's can in Minnesota. They got the record. I can't get there. Maybe if I move some bolt holes though. Hmmmmmm Correction: James Findel holds the E/SA at 10.58 and Andrew Hill holds the D/SA record at 10.39; both old cars. Hmmmmmm something amis here. Those combos need hp. F/SA is at a minimum though and I can probably run the 11.35 minimum cause of the good air. With the bolt holes removed. I bet if Andrew Hill took the bolt holes out, he could run 9.99 in D/SA.

All the bolt holes are already gone, everything's just held in place with superglue.

Ed Wright 02-27-2013 01:39 PM

Re: Record Setting time in Baytown?
 
Quote:

Originally Posted by Andrew Hill (Post 370968)
All the bolt holes are already gone, everything's just held in place with superglue.

Just hook up the other two barrels, Jeff. LOL!

Jeff Teuton 02-27-2013 10:07 PM

Re: Record Setting time in Baytown?
 
The bolt holes on my heads are hollow, and the air is routed into the throttle body after it gets a dose of blue bottle.

Andrew Hill 02-28-2013 04:41 AM

Re: Record Setting time in Baytown?
 
Quote:

Originally Posted by Jeff Teuton (Post 371055)
The bolt holes on my heads are hollow, and the air is routed into the throttle body after it gets a dose of blue bottle.

I thought the beer was by the can, not the bottle?

Jeff Teuton 02-28-2013 08:49 AM

Re: Record Setting time in Baytown?
 
I don't share my beer, not even with my faithful motor Lucky. Today in Baytown, 41 degrees, 30.23 R Barometer, 37 Dew Point, Sunny, Tomorrow Better. Andrew, son, blue bottle does not refer to beer bottle. I worry about you.

Andys dad 03-01-2013 12:28 PM

Re: Record Setting time in Baytown?
 
So just how good was it?

1320go had it at -900ft - I doubt that


Ron


All times are GMT -4. The time now is 08:24 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.