Re: Hemi B body shock tower modification?
 

Phil,
If you remember, all 64-65 NASCAR Mopars where hardtops, not sedans.

Re: Hemi B body shock tower modification?
 

Chuck Rayburn runs a 64 Belvedere Hard top in CC/SA and has run A/SA. The hood scoop is available. Your best bet is to have one made. Either Marcel's Custom metal fabrication in Corona CA. or Joey Cole -The Tin Man in Minnesota. Joey made my steel A-990 scoop. Excellent craftsmanship, cost $1,400. The originals usually need much attention after years of abuse, and have the rare parts price.

Mark Madison

Re: Hemi B body shock tower modification?
 

Yes I do remember, That's why I bought a solid 65 Plymouth Belvedere 1st for $500 only to be told the hardtop was not allowed. I see it is in the guide now though. The 65 Dodge is still listed as sedan only though, It took a few month's of searching and I had to pony up $3000 for a rusty sedan. It's to bad I have so much invested in this old Dodge chassis. I sold the 65 Plymouth years ago but do have line on a decent 64.

Mark, Joey Cole made my Hoodscoop and bumper. I probably wouldn't recommend him to any one though, It took two years to get the hoodscoop and it was very rough once I finally got it. The bumper is a piece of art but the scoop was horrible. He did offer to fix the scoop but after waiting for so long I wasn't going to take any more chances with him, and the scoop was the last thing holding me up from finishing the car. I had a local fab guy spend a few day's on it for another $600. It would be nice if NHRA would let us use a fiberglass unit instead.

Re: Hemi B body shock tower modification?
 

Yep, it would save a lot of money to be able to run fiberglass replacement parts rather than expensive aluminum parts. I have a 1964 Belvedere H/T and would prefer to use fiberglass myself. It could be equal weight for all I care. The last aluminum nose I saw for a Plymouth was $20k and that was over 12 years ago. Is that about ten times the price of fiberglass?

Re: Hemi B body shock tower modification?
 

Phil, Joey was about 3 weeks behind with my scoop and part of it was my fault. I changed from aluminum to steel mid stream. The finished product was still excellent. As a contractor, my experience has been sometimes that's how it goes with small time craftsman, great quality, lousy businessman or a project will get put on the back burner for a week, then all of a sudden it's six weeks later and the customer is screaming. The honest craftsman will make it right in the end. It would seem you have had more than your fair share of the others. Best of luck with your new bullet.

I vote no on the fiberglass parts. These are not ,nor will they ever will be cheap cars to build or run. I knew that going in.

Mark Madison

Re: Hemi B body shock tower modification?
 

I've been extremely happy with the work Joey did on an original 64 Dodge Hemi car scoop and hood, and fender and hood repair on an original 64 Plymouth. I would think what you ran into with the hood scoop issue with Joey is a rarity. I've only heard good things about Joey in the past.

Very cool cool car by the way.