CLASS RACER FORUM
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   60 ft varies and no wheel speed in burnout (https://classracer.com/classforum/showthread.php?t=53363)

Dave Jung 06-04-2014 03:29 PM
Re: 60 ft varies and no wheel speed in burnout
 
Thank you for the responses guys. Looks like I will pull the tranny this weekend. I won't feel good until I at least have a look.

Steve, I will call tonight after work. Thanks

jmantle 06-04-2014 10:45 PM
Re: 60 ft varies and no wheel speed in burnout
 
Quote:
Originally Posted by ss3011 (Post 433920)
Production 200/200-C have a one piece casting for the pump cover and stator shaft. Is there an aftermarket company that makes a pump cover with a pressed in stator shaft ?
I make up my own shafts and machine out the pump cover to install it.

Jim Mantle V/SA 6632

Dave Jung 06-04-2014 11:23 PM
Re: 60 ft varies and no wheel speed in burnout
 
I should also let you guys know I changed from C12 to Sunoco purple without any jetting or tuning. Maybe I have messed up my tune?

Thanks again

Bill Edgeworth 06-05-2014 07:26 PM
Re: 60 ft varies and no wheel speed in burnout
 
Quote:
Originally Posted by jmantle (Post 433958)
I make up my own shafts and machine out the pump cover to install it.

Jim Mantle V/SA 6632
Jim,

I'm curious, that sounds like a fair amount of work why not just convert to a 350 front? Is it not stronger? Or is that a lot more work than making the shaft?


All times are GMT -4. The time now is 09:32 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.