Re: intake manifold
 

Just missed bidding on a DA intake about 6 hours ago on eBay it went for 500.00 and it was untouched still had carbon soot build up inside of it.D??

Re: intake manifold
 

I don't get on Ebay much every time I do I get outbid.


This is the Blue Thunder I would like to see approved #IM-351C-4VC

Re: intake manifold
 

For a cylinder head to be approved, it must be currently available.

Re: intake manifold
 

Well...............so much for that plan. Next?


Bill,

After reviewing your request, there is a significant difference between the Ford and Blue Thunder plenum divider. With that said your request to allow the use of the Blue Thunder intake is denied.

Pat Cvengros

Re: intake manifold
 

Bill,
What part # heads do you use? I think I have a set of 351 4bbl or 302 boss heads stuck back in my core building. I've had these for ever. I think they are pretty much virgin. Is the water passage in the deck the only difference? I've got old timers and can't remember.
Adger

Re: intake manifold
 

Mostly yes on the diff, Adger. There were some Boss 302's with 2.25 intakes. One year I think.

Heads, probably either the D0AE-N or the D1AE-GA if claiming as a 71. (there's 3 #'s for a 72 275 horse engine which are neither of these) Which I would be looking for myself if I could afford to run my car in "G". But alas, I cannot. :(

Re: intake manifold
 

Just looked at the Guide and it shows head casting #'s for '72 and if I read it right they are: M=D2ZX-AA,D3ZE-AA,D1ZE-AA
I'm headed over to the shop in a little while and I'll see if I can dig them out.
I haven't a clue what the #'s are. I might have to wait till day light because the lighting in that building is poor. I'll post what they are. If we are lucky we can give you some class options!!
Adg

Re: intake manifold
 

I can use both heads Dave mentioned, I would be interested in getting them out of your shop and into mine once you find out what they are


My current combo has D0AE-N heads and makes big power with an illegal intake manifold:mad:

Re: intake manifold
 

1969 Boss 302 had 2.23 intakes.