CLASS RACER FORUM
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock (https://classracer.com/classforum/forumdisplay.php?f=3)
-   -   Max Wedge (https://classracer.com/classforum/showthread.php?t=55856)

Paul Precht 12-03-2014 09:12 PM
Re: Max Wedge
 
Quote:
Originally Posted by Darcy Clarke (Post 454415)
Hi Paul

The intake is a challenge. Have you built a SuperStock Wedge?

Darcy Clarke
6254
A/SA SS/JA
Hi Darcy I haven't built a SS Max but I've done a lot of flow work with the Max and the standard heads with various mani's, stock, aftermarket, sheet metal etc. I'll send you a PM, not sure if it will help but I'll share what I know, Paul.

treessavoy 12-04-2014 01:10 AM
Re: Max Wedge
 
Paul,

I've been looking at the Mod Man manifold by Indy, it may take some welding to get the right off set but it will clear the hood, of course, the other option is a hand made manifold by Wilson or some one else. If I remember correctly the stock cross ram runs out of flow around 6000rpm.

JimR

Paul Precht 12-04-2014 06:14 PM
Re: Max Wedge
 
Quote:
Originally Posted by treessavoy (Post 454497)
Paul,

I've been looking at the Mod Man manifold by Indy, it may take some welding to get the right off set but it will clear the hood, of course, the other option is a hand made manifold by Wilson or some one else. If I remember correctly the stock cross ram runs out of flow around 6000rpm.

JimR
Hi Jim, I think the stock ones were tuned for maximum ram effect in the 5,600 to 6,000 range but they hold on pretty well to near 7,000 before they start dropping hard.


All times are GMT -4. The time now is 12:37 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.