CLASS RACER FORUM
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Schubeck style lifters (https://classracer.com/classforum/showthread.php?t=57404)

MR DERBY CITY 03-31-2015 01:45 AM
Re: Schubeck style lifters
 
Buyer Beware......

GTX JOHN 03-31-2015 06:17 AM
Re: Schubeck style lifters
 
We had plenty of trouble with the early lifters (Schubeck himself built
in Vegas) too!

Alan Roehrich 03-31-2015 07:23 AM
Re: Schubeck style lifters
 
Quote:
Originally Posted by FINESPLINE (Post 466558)
Alan Roehrich has a lot of experience with big block stockers. You might want to PM him. I know he likes the Trend PPPC lifters. As far as coatings go I believe there are others besides the DLC. and you cant run certain oils or additives with certain coatings. There are a bunch of succesful big block engine builders out there and cam manufactures that can put you on the straight and narrow.

Trend and PPPC are two different companies, I use Trend, I do not use PPPC.

There are different types of tool steel lifters, they start at around $24 each, but they go way on up to around $74 each, and which one you need depends on which cam core you use.

FINESPLINE 03-31-2015 05:06 PM
Re: Schubeck style lifters
 
Yes ,that was an omission on my part. There was supposed to be or between trend and pppc. Well ,I am sure you got him on the right track.

Jim Hanig 04-01-2015 01:37 PM
Re: Schubeck style lifters
 
Quote:
Originally Posted by Alan Roehrich (Post 466594)
Trend and PPPC are two different companies, I use Trend, I do not use PPPC.

There are different types of tool steel lifters, they start at around $24 each, but they go way on up to around $74 each, and which one you need depends on which cam core you use.
Alan do feel theirs something wrong with the pppcs?

Alan Roehrich 04-01-2015 06:47 PM
Re: Schubeck style lifters
 
Jim, I had some less than satisfactory experience with them. Trend, on the other hand, has been very good to deal with.

TOSTO RACING 04-01-2015 07:07 PM
Re: Schubeck style lifters
 
Going with the coated tool steels!

FINESPLINE 04-01-2015 09:20 PM
Re: Schubeck style lifters
 
I don't think you will be sorry. Keep up the posts , enjoying the build:)

D. Hake 4459 04-02-2015 12:00 AM
Re: Schubeck style lifters
 
Since we got the Trend tool steel lifters we use the Schubecks for breaking in cams. They put a burnished finish on the lobes which is a good thing.

Tom Moock 04-02-2015 12:36 PM
Re: Schubeck style lifters
 
D Hake, I thought Jimmy was using PPPC tool steel lifters. Tom


All times are GMT -4. The time now is 08:19 AM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.