CLASS RACER FORUM
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   327 --250 hp (https://classracer.com/classforum/showthread.php?t=60430)

JRyan 12-12-2015 08:46 PM
Re: 327 --250 hp
 
I don't know how much power it made, 'cause I don't dyno, but Steve Tschetter went 10.63 @ 124.67 in SS/LA at 3450 lbs. back in 2000. That is the '64 Chevelle Larry Wilson now has but the times were done with a stock block around the same combo Larry referred to.

I didn't have anything to do with the Bowtie version of that engine (other than storing it in my garage for Steve), but I was surprised that I never saw any times close to the 10.63 after it was sold. Larry, did you go faster than that?

Jerry

LE WILSON 12-13-2015 10:16 AM
Re: 327 --250 hp
 
Jerry when I purchased the car the people who owed the car tried to put it back on the street. The motor had 8 cracked pistons and the cylinder walls were seriously scratched. I re-did the motor but it never ran like it did when Steve owned the car. I only ran 10.60's in K. I put a stick in it and it ran a lot better which makes me think I should of checked trans and converter out. I didn't know Steve but he spared no expense when he did this car.

Jim Hanig 12-13-2015 11:01 AM
Re: 327 --250 hp
 
Quote:
Originally Posted by Mike Taylor 3601 (Post 489881)
How much faster is this supposed 600 hp car?
Mike Taylor 3601
Most of the time 2tenths. The motor I run is the 62 version 4 gc 520 heads.

HP HUNTER 12-13-2015 09:18 PM
Re: 327 --250 hp
 
Quote:
Originally Posted by JRyan (Post 490079)
I don't know how much power it made, 'cause I don't dyno, but Steve Tschetter went 10.63 @ 124.67 in SS/LA at 3450 lbs. back in 2000. That is the '64 Chevelle Larry Wilson now has but the times were done with a stock block around the same combo Larry referred to.

I didn't have anything to do with the Bowtie version of that engine (other than storing it in my garage for Steve), but I was surprised that I never saw any times close to the 10.63 after it was sold. Larry, did you go faster than that?

Jerry
Thats 521 observed crank shaft HP.

Jim Hanig 12-13-2015 09:47 PM
Re: 327 --250 hp
 
Quote:
Originally Posted by Bob Gullett (Post 489885)
600 HP? What actual combo is this 327/250? There's about 3 or 4 of them.
The same 327/250 62 motor.


All times are GMT -4. The time now is 08:09 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.