CLASS RACER FORUM
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   MSD 2 step issue (https://classracer.com/classforum/showthread.php?t=62685)

Darrel Goheen 02-05-2017 02:19 AM
Re: MSD 2 step issue
 
Quote:
Originally Posted by Bob Mulry (Post 525968)
You have a PM.......................
Hi Bob, I didn't get it. Thanks.

Mike Jones 02-05-2017 08:13 AM
Re: MSD 2 step issue
 
Quote:
Originally Posted by John Nechiporchik (Post 507765)
Thanks Jim. I'll do as you suggested as I don't see any other options with my current configuration. I'm still perplexed as to how the MSD will intermittently activate without power to the circuit. MSD tech has no answer. They did suggest I could send the box in for testing....but indicated due to it's obsolete status, they could not repair it. Rather absurd suggestion. That advise was after waiting 35 minutes on hold on the tech line.
Thanks again Jim. The toggle switch comes out tomorrow.
John
Does MSD manufacture in China?
Thanks
Mike A114
P/SA

Bill Grubbs 02-05-2017 09:44 AM
Re: MSD 2 step issue
 
In America...almost all in El Paso, TX.

jimmyparker 02-05-2017 04:15 PM
Re: MSD 2 step issue
 
I had a new MSD coil tagged made in China, shocked to say the least.

Bob Mulry 02-05-2017 04:42 PM
Re: MSD 2 step issue
 
Quote:
Originally Posted by Darrel Goheen (Post 526008)
Hi Bob, I didn't get it. Thanks.
My bad......

That PM was for John.....

Bob

Timetraveler 02-05-2017 05:47 PM
Re: MSD 2 step issue
 
I have my two step wired like you do. One wire thru a toggle switch next to my shifter and connected to my brake lite switch, which is adjustable. I have hundreds of runs on it with no problem. The only way it could activate with the switch off is if the wire shorted to ground before your toggle switch.

Adger Smith 02-05-2017 05:59 PM
Re: MSD 2 step issue
 
Or a ground feed back activation.

John Nechiporchik 02-06-2017 10:01 AM
Re: MSD 2 step issue
 
Hello All.
Since my original post( last June), I changed the MSD box (Digital 7) and the intermittent 2 step problem went away.
I contacted MSD several times and they said the old box could not be repaired.
I left the on/off switch in place as I have become comfortable with it as part of my routine.

John

BWill 02-06-2017 03:08 PM
Re: MSD 2 step issue
 
This question is for Mr .Parker, what kind of pressure switch are you talking about and where could one be purchased?, Thanks


All times are GMT -4. The time now is 10:57 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.