CLASS RACER FORUM
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Oil pan for 3rd gen f body SBC (https://classracer.com/classforum/showthread.php?t=64265)

REGGIE WINKLES 12-20-2018 10:42 PM
Re: Oil pan for 3rd gen f body SBC
 
Moroso 👍

Ed Wright 12-21-2018 09:08 AM
Re: Oil pan for 3rd gen f body SBC
 
Quote:
Originally Posted by Eman (Post 578766)
I used a Milodon, but not thrilled with the kickouts on the sump and full length headers.
What other pans will fit? The competition products one measures 10.5" long at the sump, will tat fit the factory K member? Hamburgers is the same. I called Stef;s and they said their B&B 91088 was to deep at the front and it would hit the K member.

That Moroso is nice, just a little pricey.
I had a Milodon, it hit the ground on landing, if the wheel stand was very high. Ended up too close to the oil pump screen. Moroso has not hit so far.

brian schuetta 12-22-2018 10:48 AM
Re: Oil pan for 3rd gen f body SBC
 
I have a Milodon laying around that was on the last Stocker 305 I had built. Remember it fit well. The 305 didn’t catch much air in the Camaro. I’ll measure the Comp Products pan next week I’m in El Paso headed to Chicago and Milwaukee next.

brian schuetta 12-23-2018 08:07 PM
Re: Oil pan for 3rd gen f body SBC
 
Are we talking NHRA Stocker legal or other?

Eman 12-24-2018 08:20 PM
Re: Oil pan for 3rd gen f body SBC
 
My car is strictly a bracket car with a stock K member and solid Moroso mounts.

brian schuetta 12-31-2018 10:48 AM
Re: Oil pan for 3rd gen f body SBC
 
1 Attachment(s)
I made a sketch of the pan and K-member clearances. From front of pan to sump is 11". Distance between front of sump and K-member is 1". Distance between bottom of pan, non-sump area, is 1/4"-3/8". Not sure if the sketch will attach.

Eman 12-31-2018 11:07 AM
Re: Oil pan for 3rd gen f body SBC
 
Thanks for the sketch! I see it's pretty tight between the pan and K member, are you using solid motor mounts?. I'm debating notching the K member when I have the motor out.

Again thanks for measuring and have a Happy New Year!

brian schuetta 12-31-2018 02:52 PM
Re: Oil pan for 3rd gen f body SBC
 
Solid Moroso motor mounts and stock K-member.

Eman 03-18-2019 11:27 AM
Re: Oil pan for 3rd gen f body SBC
 
http://i740.photobucket.com/albums/x...psk9uoz2ky.jpgy.jpg[/IMG]





Old motor is still in the car. This is a Milodon 30900 which has the stock front section style pan that is tapered at the front. I pulled the diaper back to measure and it is tight between the centerlink and the K member. I have Moroso solid mounts but they must make taller ones than mine.

Eman 03-18-2019 11:32 AM
Re: Oil pan for 3rd gen f body SBC
 
https://i.postimg.cc/S2r4Fd2t/oil-pan-025.jpgps://postimg.cc/JDm82vnk]https://i.postimg.cc/JDm82vnk/oil-pan-026.jpghttps://i.postimg.cc/hhDg8kNF/oil-pan-027.jpg[/URL]


All times are GMT -4. The time now is 12:41 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.