CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   metric 200 chevy bolt pattern (https://classracer.com/classforum/showthread.php?t=69142)

Dan Fahey 03-02-2018 01:26 PM

Re: metric 200 chevy bolt pattern
 
Quote:

Originally Posted by ss3011 (Post 557272)
Using an overdrive automatic , has a lot to do if you use 4th gear . If you don't , then it makes more sense to run a 3 speed and take advantage of lower weight , and less rotational inertia .

Anyone using OD in the 4L60E?

D

ss3011 03-02-2018 06:03 PM

Re: metric 200 chevy bolt pattern
 
Way back in the mid 80's when Oldsmobile was out there racing a lot of 307 Cutlass's , the Stockers were running with a 350THM . I was able to get them to give me one so we could develop a 200-4R to race . To use 4th gear, I was running a 5.57 rear gear , most had about a 5.13 . At the time there was no support for the 200/200-4R so converters were a problem . Also a .67 ratio , 4th gear , dragged the engine down too far . The problem was fixed by swapping in a .72 ratio overdrive from a transmission that GM built for BMW . Now there is great support for a 200 , so converters , and lightweight internals are readily available .


All times are GMT -4. The time now is 06:52 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.