| Mike Pearson |
01-28-2019 12:01 PM |
Re: Flaming River Steering Box in a 69 Camaro
Quote:
Originally Posted by Brian Oakes
(Post 581084)
Mike are you sure you used a vega pittman arm, Vega,s are straight one's, Camaro's have a dip in them.
|
Yes. I used the straight one. I needed to lower the drag link to clear the oil pan. The straight pittman arm gave enough clearance. I did have to lower the idler arm on the opposite side to match. Then a bump steer kit to lower the tie rod end at the spindle to correct that geometry. Worked out pretty nice. |