CLASS RACER FORUM
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Stock lifters (https://classracer.com/classforum/showthread.php?t=73816)

devo340 08-12-2019 03:11 PM
Re: Stock lifters
 
Quote:
Originally Posted by Billy Nees (Post 594407)
If you're using a SOLID lifter then the Techs should use the lifter that's in the engine. I've been bit by lifter height before when going through a teardown in the days before the Techs had an adjustable lifter.

Just had ours torndown, they used what I had in the engine.

Billy Nees 08-12-2019 06:03 PM
Re: Stock lifters
 
Quote:
Originally Posted by Dwight Southerland (Post 594415)
Billy, it will take a whole lot more than roller lifters to help that junk you race. Just sayin'.
But Dwight, it's good junk!

gmonde 08-12-2019 09:15 PM
Re: Stock lifters
 
I agree with mike ,keep it the way it is ,,,ss has the unlimited valve train specs ,,,yeah stock isnt stock but there are limitations to the class,if you have performance common sense and some sweat equity, you can achieve a bunch and have satisfaction on your accomplishments

Bob Mulry 08-13-2019 05:56 PM
Re: Stock lifters
 
Is it time to start tilting at windmills, again????????????/

Just askin'

Capri 08-27-2019 03:04 PM
Re: Stock lifters
 
I did find 2 sets of Chebbie Sherman lifters if someone still is running hydraulics. I believe one set is roller and one flat.

Tim Barrett 08-27-2019 05:55 PM
Re: Stock lifters
 
How do you break in a new cam with used lifters?? I have a used set of Sherman,but have Shubeck currently in my Camaro,and always wondered if there was a good procedure.

G money 08-28-2019 07:29 AM
Re: Stock lifters
 
Tim , that's what is great with shubeck or smith lifters no break in required. G.Money

Greg Hill 08-28-2019 02:15 PM
Re: Stock lifters
 
Quote:
Originally Posted by Tim Barrett (Post 595584)
How do you break in a new cam with used lifters?? I have a used set of Sherman,but have Shubeck currently in my Camaro,and always wondered if there was a good procedure.
You need to get rid of those used lifters. All they will do is ruin a new cam.

Terry Cain 08-31-2019 06:17 AM
Re: Stock lifters
 
Quote:
Originally Posted by Jim Kaekel (Post 594384)
That's what Super Stock is for.
Tell that to the FS cars who are on the same Q sheet as the old cars. AND only 1 of those didn't make the program.

Dan Lattimore 09-01-2019 08:32 AM
Re: Stock lifters
 
Quote:
Originally Posted by Billy Nees (Post 594407)
If you're using a SOLID lifter then the Techs should use the lifter that's in the engine. I've been bit by lifter height before when going through a teardown in the days before the Techs had an adjustable lifter.
Dead on Billy ----


All times are GMT -4. The time now is 10:10 PM.
Page 2 of 3 1 2 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.