Re: 4th Gen F Body V6
 

FWD version? Okay I'm not much of a GM guy the Camaro I was working on was a 2000 3.8 V6 is that a considered a 4th Gen?

Re: 4th Gen F Body V6
 

Gen 4 F-body went from 1993 to 2002 . The 2000 F-body has one version of the 3.8L , it's rated at 200 hp . In the classification tech sheets there are two 3.8L engines listed for the 2001/2002 F-body . Looks like the only difference is the compression ratio. The higher compression engine is rated at 200 hp . The 3.8L in the FWD Monte Carlo is rated at 200 hp.

Re: 4th Gen F Body V6
 

I am still considering swapping my LT1 for the 3800 (3.8L) engine in my 95 Camaro. I cannot find anywhere whether the LT1 and RWD 3800 has the same trans mounting configuration. Also will the 3800 work with the K member that I have? Thanks.

Re: 4th Gen F Body V6
 

No . It has the FWD pattern. You'd need a not too common FWD pattern 200 case, used in early 2.8 or 2.5 applications..Good luck finding one.
I believe the cradle will work with the long V6 engine mounts.

The 185 hp version looks better to me on paper, if you're not in a hurry..No pistons approved.

Re: 4th Gen F Body V6
 

K member would work but would require custom motor mounts. V6 cradle is different than LT1 and LS1 is also different.

Re: 4th Gen F Body V6
 

Might have one of those 200 THM cases , if you are interested .

Re: 4th Gen F Body V6
 

Thanks for all the help everyone. I guess the first step after deciding to do it is finding an engine.

Re: 4th Gen F Body LT1 to V6 Swap
 

Thanks. I'll let you know if I need one and can't find one locally.

Re: 4th Gen F Body V6
 

I have an engine too .