CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Engine diapers on S/SS? (https://classracer.com/classforum/showthread.php?t=74354)

Myron Piatek 10-04-2019 12:42 PM

Re: Engine diapers on S/SS?
 
Naturally it will vary from car to car. But I was curious how long it can take to R&R a diaper.....in addition to the time if one had to pull a rod/piston!

Eman 10-04-2019 01:23 PM

Re: Engine diapers on S/SS?
 
Quote:

Originally Posted by Pat6868 (Post 599120)
Again, what percentage of stock eliminator cars oiled down tracks this year? The best way to get the diaper rule forced on stock racers is to keep talking about it.

What percentage flipped or rolled?

Pat6868 10-04-2019 02:49 PM

Re: Engine diapers on S/SS?
 
Quote:

Originally Posted by rboyle (Post 598933)
I never tried to fit one. Anyone have any experience trying to fit one and if so which one actually fits a Stock type chassis?

I don't see the "bouncing around" part of your post anymore. Again, who's bouncing this around.

MR DERBY CITY 10-04-2019 02:52 PM

Re: Engine diapers on S/SS?
 
I am sure , sooner or later ,....a DIAPER will be required for Stk/SS ....I am hoping for later ...DRE makes an excellent diaper .....

jmcarter 10-04-2019 03:32 PM

Re: Engine diapers on S/SS?
 
Fact remains that a diaper will be a slight inconvenience for some (I’ve run them on my full chassis car without hesitation) and a major impact to others.

I’m going to provide an impact statement to my SRAC rep and see what happens. If I determine its cost prohibitive to install a blanket then this car goes to bracket mode with a mild engine.

rboyle 10-04-2019 03:49 PM

Re: Engine diapers on S/SS?
 
[QUOTE=Pat6868;599120]Again, what percentage of stock eliminator cars oiled down tracks this year? The best way to get the diaper rule forced on stock racers is to keep talking

Hacksaw 10-04-2019 03:51 PM

Re: Engine diapers on S/SS?
 
This diaper issue appeared about 5 years ago concerning Super Stockers. I jacked up my SS/GT truck and then Div. 1 tech director Bob Lang crawled under. He was in full agreement that there was no room to fit a diaper.

Pat6868 10-04-2019 04:11 PM

Re: Engine diapers on S/SS?
 
Quote:

Originally Posted by rboyle (Post 598933)
I never tried to fit one. Anyone have any experience trying to fit one and if so which one actually fits a Stock type chassis?

I don't want it mandatory on my stocker, period.

stocker396 10-04-2019 05:57 PM

Re: Engine diapers on S/SS?
 
After seeing multiple incidents of oil downs over the years, I made the decision to put a diaper on both my bracket car AND my stocker. For me it’s about my own safety. I have personally had an occasion where I wished I had one( popped an oil line and got oil under the tires , saved the car but scary all the same).
I use the generic fit ones from summit/jegs. They don’t interfere with anything and only take minutes to install. I would have to pull my engine for a rod/ piston pull any way.
My friends use the DRE brand on some of their cars. Excellent product.
Safer is not sorry in my opinion. No downside to this accessory for me.

jmcarter 10-04-2019 06:05 PM

Re: Engine diapers on S/SS?
 
Quote:

Originally Posted by stocker396 (Post 599149)
After seeing multiple incidents of oil downs over the years, I made the decision to put a diaper on both my bracket car AND my stocker. For me it’s about my own safety. I have personally had an occasion where I wished I had one( popped an oil line and got oil under the tires , saved the car but scary all the same).
I use the generic fit ones from summit/jegs. They don’t interfere with anything and only take minutes to install. I would have to pull my engine for a rod/ piston pull any way.
My friends use the DRE brand on some of their cars. Excellent product.
Safer is not sorry in my opinion. No downside to this accessory for me.

Your tune might change and if you couldn’t fit one. I’d install one of DRE’s without question but unfortunately all chassis/pans/headers are not the same. I’ve even had diapers enable me to make a final when I had a water pump gasket start leaking.


All times are GMT -4. The time now is 08:06 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.