CLASS RACER FORUM
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   cc'ing cylinder heads (https://classracer.com/classforum/showthread.php?t=76242)

Ron Gusack 05-18-2020 10:12 AM
Re: cc'ing cylinder heads
 
Is it a no-no to use tap water?

Dave Gantz 05-18-2020 10:53 AM
Re: cc'ing cylinder heads
 
Quote:
Originally Posted by Ron Gusack (Post 614847)
Is it a no-no to use tap water?
Water has a lot of surface tension that would make it hard to make it flow. Surface tension can be broken with a few drops of dish soap, but I never tried it to cc.

Myron Piatek 05-18-2020 12:11 PM
Re: cc'ing cylinder heads
 
***

Steve Polhill 05-19-2020 05:49 PM
Re: cc'ing cylinder heads
 
Quote:
Originally Posted by jmantle (Post 614588)
I normally use isopropyl alcohol for checking chamber and port volumes, can't seem to buy any right now, what else works?

Jim Mantle V/SA 6632
Windshirld waster fluid. It's cheap, easy to find, and a gallon will last you for ever. The winter -40 type the summer stuff is more of a soap and can foam up.

4406mopar 05-20-2020 03:44 AM
Re: cc'ing cylinder heads
 
Quote:
Originally Posted by silversedan (Post 614606)
I use marvel mistery oil , cause it's red an easy to see.
How about ATF?

John Dinkel 05-20-2020 11:04 AM
Re: cc'ing cylinder heads
 
Too thick


All times are GMT -4. The time now is 08:15 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.