CLASS RACER FORUM
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   cylinder wall finish (https://classracer.com/classforum/showthread.php?t=78133)

pmrphil 12-23-2020 07:47 PM
Re: cylinder wall finish
 
For blocks and cranks in long term storage I use spray white lithium grease, but don't miss a spot. :(

monte385 12-23-2020 10:05 PM
Re: cylinder wall finish
 
LPS 3 https://www.amazon.com/LPS-Premier-R.../dp/B000SKWQQS

SSDiv6 12-24-2020 01:43 AM
Re: cylinder wall finish
 
Quote:
Originally Posted by Mike Miljanovic (Post 630334)
Watch, watch, watch: WD 40 is the worst thing for rust prevention. I bought a block that was stored for five years; was told it was sprayed once a year. Machinist gave it back to me & said .030 over will not clean it up; looking for another block. Lost a crank that same way. Grease it up boys; lasts forever!
WD-40 Specialists Rust Inhibitor Lubricant is not the same as the over the counter WD-40. As a matter of fact, WD-40 has a complete line of different products.

richie 2 12-30-2020 08:12 AM
Re: cylinder wall finish
 
there is no rust issue. walls r discoloured thats all. giving it a shot with the plateau brush hone...let u know. thankyou everyone for your insite.


All times are GMT -4. The time now is 07:26 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.