CLASS RACER FORUM
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   GM 12 Bolt - Racepak Drive Line Sensor Bracket (https://classracer.com/classforum/showthread.php?t=79111)

rboyle 04-22-2021 09:04 PM
Re: GM 12 Bolt - Racepak Drive Line Sensor Bracket
 
Mark Williams sells a yoke but it's about 7/16" longer with the flange for the collar.

SGSST109E 04-23-2021 06:39 AM
Re: GM 12 Bolt - Racepak Drive Line Sensor Bracket
 
A mig welder or for that matter a stick welder. A housing welds easy. I have a yoke from strange the only negative it is longer so the driveshaft needs to be shorter.

curtis reed 04-23-2021 07:56 AM
Re: GM 12 Bolt - Racepak Drive Line Sensor Bracket
 
Quote:
Originally Posted by bestephen (Post 639157)
I like how clean this looks, Is there a special welding procedure for welding to the cast iron casing?

TIG it with Inconel 600 filler rod.

tavbfl 04-29-2021 03:37 PM
Re: GM 12 Bolt - Racepak Drive Line Sensor Bracket
 
1 Attachment(s)
This is how I did it for my Autometer DL driveline speed sensor.

Glenn Briglio 04-29-2021 07:25 PM
Re: GM 12 Bolt - Racepak Drive Line Sensor Bracket
 
Mine is done with the sensor on the front driveshaft yoke and a bracket off the driveshaft loop.


All times are GMT -4. The time now is 09:23 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.