Re: Rear Coilover Spring Rate Help
I bought a set of D/A Koni's Bickle valved in the late 90's. He suggested a 175 on this all steel Nova.
If you look at his spring recommendations in one of his catalogs, 1500-1800 rear weight he suggests a 175. I did put a 125 spring on this to run some local 370 Pro Tree races. It did work for the fast tree, however it acted more so than previously, like it needed a ARB. Ladder bar sbc 10x28 bias, 3200 lbs. Eibach or PAC coilover springs are the good ones, if you can find PAC, they've stopped producing , coil springs. I just bolted a set of PAC 165 on this, i bought and made one hit on in 2017, went 1.28 60ft last car down on a Thursday night test n Tune prep n/a sbc. 1550 lbs on back tires. Not criticizing anyone's suggestions here, just stating my experience, light vs heavy spring. https://i.imgur.com/o1JP9bM.jpg |
Re: Rear Coilover Spring Rate Help
OP stated he was using a 19" shock. I made some assumptions from that as far as shock travel, installed length at ride height, spring free length and compressed length at ride height, etc. All of which make a difference.
|
Re: Rear Coilover Spring Rate Help
Mike Rietow
Give me a call when you gat a chance. I would like to discuss further. Mark 210-392-9902 |
All times are GMT -4. The time now is 08:55 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.