CLASS RACER FORUM
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Transmission Shields (https://classracer.com/classforum/showthread.php?t=81663)

fordteacherguy 03-29-2022 11:35 AM
Re: Transmission Shields
 
Quote:
Originally Posted by SSDiv6 (Post 658473)
The Tom Waters Race Car Products Shield sold by Scott McClay and others, fits nice and has no issues on a SS/GT Cobalt.
FYI:

Ordered a Tom Waters C-4 shield through Competition Products a week or so ago. i was contacted by CP's purchasing manager who said he is out of business and they were pulling his products listings from their website and refunded my money.

SSDiv6 03-29-2022 04:45 PM
Re: Transmission Shields
 
Quote:
Originally Posted by fordteacherguy (Post 659410)
FYI:

Ordered a Tom Waters C-4 shield through Competition Products a week or so ago. i was contacted by CP's purchasing manager who said he is out of business and they were pulling his products listings from their website and refunded my money.
Brian,
Summit Racing carries the TCI brand C-4 shield, both in Red and Blue color.

Jim Caughlin 03-31-2022 06:52 PM
Re: Transmission Shields
 
Quote:
Originally Posted by SSDiv6 (Post 659429)
Brian,
Summit Racing carries the TCI brand C-4 shield, both in Red and Blue color.
And they will not even remotely fit under the stock floorpan, don't even try.

Frank Bialas 03-31-2022 08:12 PM
Re: Transmission Shields
 
Quote:
Originally Posted by Jim Caughlin (Post 659535)
And they will not even remotely fit under the stock floorpan, don't even try.
They didn't fit 40 years ago, unless they changed design, good luck!!! Do what most of use are doing, snap a blanket to inner tunnel so not to suffocate-overheat trans and strap lightly not to bind up linkage, also careful around a vent if relocated and especially headers not to start a fire if some fluid escapes, or cut out tunnel.

CMcAllister 04-08-2022 11:58 PM
Re: Transmission Shields
 
Making the tunnel removable makes life easier all around.

Larry Hill 04-09-2022 08:47 AM
Re: Transmission Shields
 
TheTCI one fits in the DP Challenger after a little work. The flex plate shield is a little bit of work to get all of the trans bolts to start and thread in three tuns with your fingers. The aluminum block really makes you cautious of cross threading a bolt. That is bending and trimming the tabs to fit the case.


All times are GMT -4. The time now is 03:50 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.