CLASS RACER FORUM
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   MSD Wires?? (https://classracer.com/classforum/showthread.php?t=81692)

SSGN 03-17-2022 06:42 AM
Re: MSD Wires??
 
Thanks very much for the opinions. I am going to go with the Moroso on performance cars. I see lots of companies (Reher Morrison) use the 8mm Blue max and I am considering those. On a street/show car I am also considering the Jegs/Summit brands. They are made in the USA and reasonably priced when costs up here are out of control.
Thanks again

Steve Stasko 03-17-2022 08:57 AM
Re: MSD Wires??
 
Quote:
Originally Posted by SSGN (Post 658898)
Thanks very much for the opinions. I am going to go with the Moroso on performance cars. I see lots of companies (Reher Morrison) use the 8mm Blue max and I am considering those. On a street/show car I am also considering the Jegs/Summit brands. They are made in the USA and reasonably priced when costs up here are out of control.
Thanks again
The larger Summit wire is the same as the Firecore.

Tim H 03-17-2022 10:14 AM
Re: MSD Wires??
 
I have a set of the smaller 8mm Summit wires on my SBC street driven Camaro. Quite pleased with them so far, limited miles driven the last 2 summers.

Dave Turner 03-17-2022 10:43 AM
Re: MSD Wires??
 
Quote:
Originally Posted by SSGN (Post 658898)
Thanks very much for the opinions. I am going to go with the Moroso on performance cars. I see lots of companies (Reher Morrison) use the 8mm Blue max and I am considering those. On a street/show car I am also considering the Jegs/Summit brands. They are made in the USA and reasonably priced when costs up here are out of control.
Thanks again
Very pleased with the Moroso wires on my car Kev...they were assembled for me at the factory. :)

drgrcr1156 03-29-2022 12:20 PM
Re: MSD Wires??
 
When you fill out a request for info on a web site, it would be nice if they would respond. Had a question for Scott and Firecore for semi-custom wires and got nothing back. Even asked Scott twice.


Update:
Rick from Firecore did call me back. Wireset on order.


All times are GMT -4. The time now is 11:27 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.