CLASS RACER FORUM
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   1995 Mustang headers (https://classracer.com/classforum/showthread.php?t=83158)

Rory McNeil 10-05-2022 07:08 PM
Re: 1995 Mustang rear gearing
 
Quote:
Originally Posted by Larry Ingram (Post 668653)
Would any of you Stock eliminator Mustang Racers with 302W mind telling me what gear you down South with a 9.0x29.5 rear tire. Appreciated Larry
On my 85 Mustang, 302 4 barrel 4 speed, using 9x29, and 9 x 29 1/2 slicks, I ran both 4.88s and 5.13s.

Terry Witzel 10-05-2022 08:16 PM
Re: 1995 Mustang headers
 
Quote:
Originally Posted by Kirk Morgan (Post 668521)
I looked at Kooks and the only thing i found was 4.6 and 5.0 Coyote swap headers.
Thanks
My foxbody has Kooks. I really like the fit, but I don't think that they are available anymore.

BRETV 10-05-2022 09:01 PM
Re: 1995 Mustang rear gearing
 
Quote:
Originally Posted by Larry Ingram (Post 668653)
Would any of you Stock eliminator Mustang Racers with 302W mind telling me what gear you down South with a 9.0x29.5 rear tire. Appreciated Larry
5.13




Bret Velde
2003 ??/SA

JHeath 10-11-2022 10:22 PM
Re: 1995 Mustang headers
 
Quote:
Originally Posted by Kirk Morgan (Post 668600)
Iam building Super Stock GT 352 Cobra Jet combo. I found the Pace Setter headers shortly after posting for help. I did not know about the BBK headers. I have researched on some other forums about fitment between Fox body and SN95 with mixed results. I was thinking of going with a 13/4 header tube. Iam waiting for connecting rods and then i will begin assembling the engine. Thanks for the research and ideas,
One thing to remember, the Z304D heads have raised exhaust ports compared to the windsor heads which most off the shelf headers are designed for, Rusty Hall has a 352 powered FGT/G 92 Mustang, maybe check with him. Nick Morris also has a FGT 98 mustang with a 352 CJ engine.


All times are GMT -4. The time now is 05:06 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.