CLASS RACER FORUM
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Fel Pro 97060-3 SBC Intake Gasket (https://classracer.com/classforum/showthread.php?t=89280)

Mike Pearson 03-28-2025 09:35 AM
Re: Fel Pro 97060-3 SBC Intake Gasket
 
I use the gaskets from Heads Up. They have them available in regular thickness and double thickness. Give them a call. I usually buy 6 sets at time. they have the oval port configuration.

Greg West 03-28-2025 12:06 PM
Re: Fel Pro 97060-3 SBC Intake Gasket
 
You could send a sample or a drawing to Flatout Gaskets. They can make what you need.

SSDiv6 03-28-2025 02:41 PM
Re: Fel Pro 97060-3 SBC Intake Gasket
 
Quote:
Originally Posted by Greg West (Post 710904)
Yes, I believe I made those gaskers for Rick Watters. I retired from Fel-Pro almost ten years ago now. Those individual parts were never put into a Intake Gasket Set. We only sold them as a bulk part to Rick. Best bet would be to try to contact Rick.
Rick is back in Arizona.
I believe he is working at Outlaw Race Engines in Phoenix, Arizona.


All times are GMT -4. The time now is 08:40 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.