CLASS RACER FORUM
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Rocker Arms---Does an official clarification exist (https://classracer.com/classforum/showthread.php?t=55395)

magnumv8 10-24-2014 08:42 PM
Re: Rocker Arms---Does an official clarification exist
 
I think the response to the question is being misinterpreted....there is a spec for total valve lift and a rocker ratio listed in the spec.....what Bruce said was " the cam lobe lift checked with a solid lifter and the numbers are good you are all set to go ".....in this case your rocker ratio better be correct or you will be bounced, I personally wouldn't mess with taking a chance on that...too expensive of a mistake......


D L Rambo......Stk 1300

Mark Yacavone 10-24-2014 09:11 PM
Re: Rocker Arms---Does an official clarification exist
 
Quote:
Originally Posted by magnumv8 (Post 450844)
I think the response to the question is being misinterpreted....there is a spec for total valve lift and a rocker ratio listed in the spec.....what Bruce said was " the cam lobe lift checked with a solid lifter and the numbers are good you are all set to go ".....in this case your rocker ratio better be correct or you will be bounced, I personally wouldn't mess with taking a chance on that...too expensive of a mistake......


D L Rambo......Stk 1300
Here is the quote posted by Rusty:

" AS LONG AS THE CAM LIFT, CHECKED WITH A SOLID LIFTER, DOES NOT EXCEED THE SPEC YOU ARE ALL SET "

Bill Diehl 10-24-2014 10:10 PM
Re: Rocker Arms---Does an official clarification exist
 
I wish I could use a .502 lobe on my combo:D

but the book says "cam lift" and we all know what that means


All times are GMT -4. The time now is 01:56 AM.
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.