CLASS RACER FORUM
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Pure Stock Suspension (https://classracer.com/classforum/showthread.php?t=60832)

Dan Fahey 02-26-2016 04:43 PM
Re: Pure Stock Suspension
 
Quote:
Originally Posted by Mike Taylor 3601 (Post 496940)
I believe the 3/4'' +/- is not for relocation but is tolerance of wheel base.
On my car have urethane bushings and boxed stock control arms.
Mike Taylor 3601
You are correct.
Use that tolerance for the B-Body Chevy's.
Have Dick Miller Bolt on stuff.
My stock arms and bushings were all beaten up after 200k of driving and many runs on the Strip.

Dan

1969A56 01-23-2017 09:11 PM
Re: Pure Stock Suspension
 
How about adjustable pinion snubbers?

Dan Fahey 01-24-2017 01:23 PM
Re: Pure Stock Suspension
 
Quote:
Originally Posted by 1969A56 (Post 524909)
How about adjustable pinion snubbers?
YEAH you can do that!
Once you establish best height you will not move it.

I used glue and pieces of wood on my 1969 Impala.
Make sure you have a full inch of travel.

D


All times are GMT -4. The time now is 10:53 AM.
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.