CLASS RACER FORUM
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock (https://classracer.com/classforum/forumdisplay.php?f=3)
-   -   Header coatings (https://classracer.com/classforum/showthread.php?t=68700)

jmcarter 01-16-2018 11:03 AM
Re: Header coatings
 
Quote:
Originally Posted by Bobby Butler (Post 553859)
M&R great people an do good coating ,have had a few sets coated by by Mike
Mike indeed does a great job. He’s done work for me and I was very satisfied.

Lee Jordan (3223) A/S 01-16-2018 03:54 PM
Re: Header coatings
 
Quote:
Originally Posted by Crisco (Post 553649)
William, give the guys at M&R 865-933-1478. They have a quality product, will stand behind their product and are racers. They are a small company and do not take credit cards (the last time I used them at least) and they will ask you to mail a check after they are finished with them.
That says a lot right there. Send the check after they are finished! Sounds outstanding to me...

mrperf 01-17-2018 04:00 PM
Re: Header coatings
 
We do accept credit cards and have for many years. thanks Mike

Crisco 01-17-2018 04:49 PM
Re: Header coatings
 
Quote:
Originally Posted by mrperf (Post 554017)
We do accept credit cards and have for many years. thanks Mike
Mike, that is good to know. But when I sent in a couple sets, I offered to pay with CC and ya'll told me to just mail a check..LOL

Keep up the good work.

Greg West 01-19-2018 05:32 PM
Re: Header coatings
 
For those of you that had headers coated by NitroPlate, what is the proper breakin procedure? I had a set coated by NitroPlate some time ago and I am just getting ready to use them. Also,is there a product I should use to wipe them down with before starting the engine?

Thank you.

Crisco 01-19-2018 06:45 PM
Re: Header coatings
 
Quote:
Originally Posted by Greg West (Post 554172)
For those of you that had headers coated by NitroPlate, what is the proper breakin procedure? I had a set coated by NitroPlate some time ago and I am just getting ready to use them. Also,is there a product I should use to wipe them down with before starting the engine?

Thank you.
We didn't have a break in procedure because our coatings (Nitroplate) were completely cured before they were shipped to the customer. One thing you need to be sure of though, is that you are jetted (tuned) pretty close at intitial start up. You can use any kind of aluminum polish to clean them also.

Greg West 01-20-2018 03:54 PM
Re: Header coatings
 
Thanks for the reply.


All times are GMT -4. The time now is 05:02 AM.
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.